User manual SHARP CD-XP160W

[. . . ] When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. This unit contains no user serviceable parts. Never remove covers unless qualified to do so. [. . . ] In case of an electrical storm, unplug the unit for safety. Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. - Precautions - z z General No naked flame sources, such as lighted candles, should be placed on the apparatus. Attention should be drawn to the environmental aspects of battery disposal. This unit should only be used within the range of 5°C - 35°C (41°F - 95°F). T z z z z z z z z z z Warning: The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. Volume control The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at switch on and listen to music at moderate levels. 02/5/27 CD-XP160W(X)E1. fm Controls and indicators Front panel CD-XP160W ENGLISH General Information - Controls and indicators - T Reference page 1. CD Track Down or Fast Reverse, Tuner Preset Down Button . CD Track Up or Fast Forward, Tuner Preset Up Button . Equaliser Mode Select/Extra Bass/ Demo Mode Button . [. . . ] 2 Set the SPAN SELECTOR switch (on the rear panel) as follows. For 100 kHz FM interval (10 kHz in AM) 100/10 For 50 kHz FM interval (9 kHz in AM) 50/9 3 Whilst pressing down the TUNER (BAND) button and the DISC SKIP button, press the ON/STAND-BY button until "CLEAR" appears. To turn the power on - System connections - T Setting the FM/AM span selector Demonstration mode z z T The first time the unit is plugged in, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the EQUALIZER/X-BASS/DEMO button. [. . . ]