User manual SHARP CDBA1200 OPERATION MANUAL PART (FROM THE SERVICE MANUAL)

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP CDBA1200. We hope that this SHARP CDBA1200 user guide will be useful to you.

Lastmanuals help download the user guide SHARP CDBA1200.

Download

You may also download the following manuals related to this product:

SHARP CDBA1200 QUICK START GUIDE (132 ko)

Manual abstract: user guide SHARP CDBA1200OPERATION MANUAL PART (FROM THE SERVICE MANUAL)

Detailed instructions for use are in the User's Guide.

 [. . . ] SETTING THE CLOCK
or ) button to adjust

REMOTE CONTROL

In this example,  the clock is set for the 24-hour (0:00) system. 

6

Press the TUNING/TIME ( the hour. 

CD-BA1200H

(Main unit operation)

ON/ STAND-BY
15
15

CLOCK MEMORY/SET

Press the TUNING/TIME ( or ) button once to advance the time by 1 hour.  [. . . ] Hold it down to change the time in 5 - minute intervals. The hour setting will not advance even if minutes advance from "59" to "00". 

Reset the microcomputer under the following conditions: To erase all of the stored memory contents (clock and timer settings,  and tuner and CD presets). If the operation is not correct. 

9

OPERATION MANUAL

­6­

Press the MEMORY/SET button. 

1 2

Press the ON/STAND-BY button to enter the standby mode. Whilst pressing down the / button and the EQUALIZER/X-BASS/DEMO button,  hold down the ON/STAND-BY button for at least 1 second. Caution: The operation explained above will erase all data stored in memory including clock and timer settings,  and tuner and CD presets. 

4

Press the TUNING/TIME ( time display mode. 

or

) button to select the

The clock starts operating from "0" second. (Seconds are not displayed. ) And then the clock display will disappear after a few seconds. 

0:00

AM 0:00

AM 12:00

To see the time display: Press the CLOCK button.  [. . . ] 3 Perform steps 6 - 9 above. 

5

Press the MEMORY/SET button. 

To change the time display mode: 1 Perform steps 1 - 2 in "RESETTING THE MICROCOMPUTER".  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP CDBA1200

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP CDBA1200 will begin.