User manual SHARP CDDP2400H OPERATION MANUAL

[. . . ] MINI COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-DP2400H Mini Component System consisting of CD-DP2400H (main unit), CP-DP2400H (front speakers), GBOXS0072AWM1 (centre speaker) and GBOXS0073AWM1 (surround speakers). CD-DP2400H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. [. . . ] The / or / button on the remote control allows you to locate the beginning of a track. To stop playback: Press the (CD ) button. " To locate the desired portion For audible fast forward: Press and hold down the button during playback. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. After use: Press the ON/STAND-BY button to enter the power stand-by mode. For audible fast reverse: Press and hold down the button during playback. Caution: !Do not push the disc tray whilst it is moving. If the power fails whilst the tray is open, wait until the power is restored. If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Notes: !Normal playback will resume when the or button is released. You can locate the desired portion on a single disc only. When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. The / or / button on the remote control allows you to locate the desired portion. 16 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Repeat or random play " Starting Playback with a Desired Track You can play a disc starting with the desired track. CD-DP2400H " Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. 1 To repeat all tracks on up to 3 discs: Whilst in the stop mode, press one of the DISC-1 - DISC-3 buttons or DISC SKIP button to select the desired disc. Selected disc number Press the / ( ) button twice. To repeat a desired track: Perform steps 1 - 4 in the "Programmed play" section and then press the button twice. / ( ) " Random play The tracks on the disc(s) can be played in random order automatically. Press the RANDOM button on the remote control to begin random play. Selected track number You can also select a track by pressing the remote control. / or / button on the 3 Press the / ( ) button to start playback. To cancel random play: Press the button. Playback of the selected track is started. When the end of last track of the disc selected is reached, the next disc will be automatically started. To stop playback: Press the (CD ) button. Notes: !If you press the / button during random play, you can move to the track selected next by the random operation. On the other hand, the / button does not allow you to move to the previous track. The beginning of the track being played will be located. In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) Notes: ! [. . . ] " Do not apply oil to the inside of the unit. It may cause malfunctions. 30 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. CD-DP2400H ! [. . . ]