User manual SHARP CD-X100AV

[. . . ] This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. Q Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the apparatus. Q Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Z Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared. Z During programme operation, random play is not possible. , , Tuning 1 Press the ON/STAND-BY button to turn the power on. When the TUNING/TIME button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Z When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light. The reception changes to monaural, and the sound becomes clearer. Press the ON/STAND-BY button to enter the power stand-by mode. You can store 40 AM and FM stations in memory and recall them at the push of a button. Within 30 seconds, press the PRESET ( preset channel number. The stations saved in memory can be scanned automatically. They send their station names, and information about the type of programme such as sports or music, etc. when tuned to an RDS station , "RDS" and the station name will be displayed. "TP" (Traffic Programme) will appear on the display when the received broadcast carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic information is on air. "PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is received. You can control the RDS by using the buttons on the main unit only. When you are tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order: If any of the following events occur, it does not mean that the unit is faulty: Z "PS", "NO PS" and a station name appear alternately, and the unit does not operate properly. Z If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. Z When you receive an RDS station whose signal it too weak, information like the station name may not be displayed. Z "NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and then the frequency will be displayed. Z The first 8 characters of the radio text will appear for 4 seconds and then they will scroll across the display. Z If you tune in to an RDS station which is not broadcasting any radio text, "NO RT" will be displayed when you switch to the radio text position. [. . . ] ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. [. . . ]