User manual SHARP CDXP200H OPERATION MANUAL

[. . . ] Mini Komponenten System CD-XP200H besteht aus CD-XP200H (Hauptgert) und CPXP200H (Lautsprecher-System). Mini-chane CD-XP200H compose de CD-XP200H (appareil principal) et de CP-XP200H (enceintes acoustiques). MINI KOMPONENTEN SYSTEM MINI-CHANE SISTEMA MINI MINI KOMPONENT SYSTEM MINI SISTEMI MINI SYSTEEM MINI SISTEMA DE COMPONENTES MINI COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Sistema mini CD-XP200H que consta de CD-XP200H (aparato principal) y CP-XP200H (sistema de altavoces). CD-XP200H mini komponent system bestende av CD-XP200H (huvudenhet) och CPXP200H (hgtalarsystem). Mini sistemi CD-XP200H composto da CD-XP200H (apparecchio principale) e CP-XP200H (sistema di diffusori). [. . . ] After that disc finishes playing, the next disc will automatically start playback. When the last track on the third disc has finished playing, the CD player will stop automatically. When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. !CDs can be placed on any open position on the disc tray. Be sure to place 8 cm (3") CD(s) in the middle of the disc positions. To interrupt playback: Press the CD button on the remote control. To resume playback from the same point, press the button. To stop playback: Press the button. To remove the CDs: 12 cm (5") 8 cm (3") Whilst in the stop mode, press the OPEN/CLOSE button. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. After use: Press the ON/STAND-BY button to enter the power stand-by mode. E-11 Sound control (See page 9. ) 02/02/19 CD-XP200H(H)E2. fm CD-XP200H ENGLISH " To locate the beginning of a track To move to the beginning of the next track: Press the / button for less than 0. 5 seconds during playback. You can skip to any track by pressing the sired track number appears. " Starting playback with a desired track You can play a disc starting with the desired track. 1 2 Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control or DISC SKIP button to select the desired disc. Press the / or / button to select the desired track. Selected disc number To restart the track being played: Press the / button for less than 0. 5 seconds during playback. You can skip to any track by pressing the sired track number appears. Notes: !You can locate the beginning of a track on a single disc only. or button on the remote control allows you to locate the begin!The ning of a track. or button on the remote " To locate the desired portion For audible fast forward: Press and hold down the Press and hold down the / / button during playback. button during playback. 3 Press the / ( ) button to start playback. Playback of the selected track is started. When the end of last track of the disc selected is reached, the next disc will be automatically started. For audible fast reverse: Notes: / or / button is released. You can locate the desired portion on a single disc only. When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. or button on the remote control allows you to locate the desired !When the DISC SKIP button is pressed during playback, the next disc will begin automatically. When one of the 1 - 3 buttons on the remote control is pressed during playback, the selected disc will begin automatically. Caution: ! [. . . ] Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. Playback head Capstan Pinch roller D E B C TAPE 2 References Erase head Recording/Playback head Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. " After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. [. . . ]