User manual SHARP CL-300/FT-4400

[. . . ] Consulte las páginas S-1 a S-48. NTSC/PAL SHARP CORPORATION 04/5/17 CL-300/FT-4400(Z)_FR. fm TINSZA075AWZZ CL-300/FT-4400 ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ENGLISH Special notes Important Instruction Warning: !When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. [. . . ] This function is not available with an audio CD or MP3 disc. This function does not work during P. B. C. This function does not work during programmed play. 1 Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second. "BOOKMARK DIGEST" will appear before the marked scenes and numbers are displayed on the TV screen. Each time a bookmarked scene is displayed, you can hear the first several seconds of the scene. After displaying every scene, this unit will enter the pause mode automatically. Disc Playback To cancel the bookmark function: Press the (RETURN ) button. 4 E-24 04/5/17 CL-300/FT-4400(Z)E3. fm TINSZA075AWZZ CL-300/FT-4400 Advanced video CD playback (continued) " Time search selection You can play back from the desired scene by specifying the time. ENGLISH " Disc digest selection You can play back a desired track by selecting one from the 9 displayed tracks on the screen. 1 Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. <TV screen> GO TO : 1 Whilst in the stop mode, press the DIGEST (DIGEST/TIME SEARCH) button. !Up to 9 tracks will be displayed on the screen. Each time a track is displayed, you can hear the first several seconds of the track. 2 Disc Playback Use the direct search buttons on the remote control to specify the time. [For example, to select 2 minutes and 30 seconds. ] Press "0", "2", "3", "0" successively. <TV screen> GO TO 02:30 <TV screen> 1 8 7 2 9 6 3 4 5 2 Selected time !The point of specified time will be located on the track being played and playback will resume from that point. After the last track on the fifth disc is played, the unit will stop automatically. This function does not work during programmed play. During playback, press the DIGEST (DIGEST/TIME SEARCH) button. !The track being played back will be divided into 9 sections and playback will be paused. Each time a divided section is displayed, you can hear the first several seconds of the section. " Resume play This function is to restart playback from the point where it has stopped. During the stop mode, hold down the / (SELECT/RESUME ) button for more than 1 second. Playback will begin at the point where playback has stopped. <TV screen> 1 8 7 2 9 6 3 4 5 2 Press the direct search buttons on the remote control to select the scene you want to watch. Playback will be started from the selected scene. After the last track on the fifth disc is played, the unit will stop automatically. To cancel the track digest operation: Press the (RETURN ) button. Notes: !Resume play cannot be activated when the function is changed from CD/VIDEO CD to another or the unit is set to the power stand-by mode. Resume play cannot be performed whilst opening the disc tray or after changing the disc. This function does not work during P. B. C. mode when playing video CDs with P. B. C. Disc Playback 4 E-26 04/5/17 CL-300/FT-4400(Z)E3. fm TINSZA075AWZZ CL-300/FT-4400 Advanced video CD playback (continued) " To play back the video CD manually Usually this unit detects the video CD and plays back pictures and sounds. [. . . ] Is the FM aerial or AM loop aerial placed properly?Move the aerial away from the AC power lead if it's located nearby. " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. [. . . ]