User manual SHARP CL-400/FT-5400 OPERATION MANUAL

[. . . ] In the stand-by position, power is being supplied to a drying heater within the optical system of the copier. Caution: For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. To protect against loss or theft, record and retain for reference the machine?s serial number located on the back of the unit. [. . . ] GTo change the original size stored in the key, touch the [STORE] key. The screen of step 5 will appear to let you change the size. 4 Touch thetooriginal size key ( you wish store or delete. X51/2 Y101/8 ) that 8 To exit, touch the [ORIGINAL] key. I USING A STORED ORIGINAL SIZE 1 to 2 of "STORING 1 Follow steps ORIGINAL SIZE". DELETING AN OR To store an original size, touch a key that does not show a size ( ). STORE/DELETE RECALL Keys that already have an original size stored will show the stored size ( X5 Y10 ). 1 / 2 1 / 8 2 Touch the original size key that you wish to use. X51/2 Y101/8 To delete or change a stored size, touch the key that shows the size that you wish to delete or change. GIf you are storing an original size, go to step 5. GTo delete or change an original size, go to step 7. RECALL STORE/DELETE [OK] 3 Touch theoriginalkey. The stored size 4-9 WhaleII_general-copy_SEC. book 10 ?????????????????????????? WhaleII_general-copy_SEC. book 1 ??? ??????????????????????? CHAPTER 5 BASIC PROCEDURE FOR MAKING COPIES This chapter explains the procedures for using basic copy functions, including making normal copies and enlarging/reducing copies. Page NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 G Copying from the reversing automatic document feeder . . . . . . . . . . . . . . . . . . . . . . . 5-2 G Automatic two-sided copying from the reversing automatic document feeder. . . 5-6 G Copying from the document glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 G Automatic two-sided copying from the document glass . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 EXPOSURE ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 REDUCTION/ENLARGEMENT/ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 G Automatic selection (auto image). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 G Manual selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 G XY ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 SPECIAL PAPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 5-1 WhaleII_general-copy_SEC. book 2 ??? ??????????????????????? NORMAL COPYING This section describes the normal copying procedure. Copying from the reversing automatic document feeder NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Guidelines for the number of scannable originals during sort copying" on page 5-4. ) I 1-sided copies of 1-sided originals Original Copy the originals in the 1 Place(pages 4-6 to 4-9) document feeder tray. 5 Touch the [OK] key. 0 OK 2 Ensure that the 1-sided to 1-sided copy mode is selected. ORIGINAL 8x11 PLAIN 5x8 paper of the as the 6 Ensure thatautomaticallysame size(*Note) originals is selected. The selected tray will be highlighted or the AUTO 8x11 message "LOAD xxxxxx PAPER SELECT PAPER. " will appear. If the message appears, load paper in a paper 100% tray with paper of the required size. Even if the message above is displayed, copying can be performed onto the currently selected paper. (*Note) The following requirements must be satisfied. Automatic two-sided copying from one-sided originals 2. Automatic two-sided copying from two-sided originals 3. Automatic one-sided copying from two-sided originals G This function can be used even if a duplex module/2 x 500 sheet paper drawer and/or a duplex bypass/ inverter unit are not installed. the originals in the 1 Place(pages 4-6 to 4-9) document feeder tray. Example of a portrait-oriented original Example of a landscape-oriented original 2 Touch the [2-SIDED COPY] key. 2-SIDED COPY OUTPUT 3 Select the desired duplex copy mode. READY TO COPY. SIDED COPY The left screen shows the display when a reversing automatic document feeder, a duplex module/2 x 500 sheet paper drawer, and a duplex bypass/inverter unit are installed. The display will vary depending on the equipment installed. INTERRUPT OK BINDING CHANGE The image to be copied onto the second side of 2sided copies can be inverted so that the resultant 2-sided copies are in the correct orientation for binding at the top. For top binding, touch the [BINDING CHANGE] key on the 2-sided copy selection screen. 4 Touch the [OK] key. OK BINDING CHANGE If a copy key is touched for a mode that cannot be selected, a double beep will be sounded. Make selections and proceed as in steps 6 to 9 on pages 5-2 and 5-3. 5-6 WhaleII_general-copy_SEC. book 7 ??? ??????????????????????? NORMAL COPYING Copying from the document glass When copying originals which cannot be fed from the reversing automatic document feeder such as thick originals, open the document cover and copy the originals from the document glass. NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Guidelines for the number of scannable originals during sort copying" on page 5-4. ) I 1-sided copies of 1-sided originals Original Copy original 1 Set an 4-6 to 4-9)on the document glass. (pages NOTE Do not place any objects under the original size detector, because they may damage it or the original size may not be detected properly. same size as the 3 Ensure that paper of the selected. (*Note) original is automatically The selected tray will be highlighted or the message "LOAD xxxxxx PAPER. " will appear. If the message appears, load paper in a paper 100% tray with paper of the required size. [. . . ] 2-9 Speed mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Stand/1 x 500 sheet paper drawer . . . . . . . . . 1-6, 2-7, 2-21 Stand/3 x 500 sheet paper drawer . . . . . . . . . 1-6, 2-7, 2-21 Stand/paper drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]