User manual SHARP CP-C250H

[. . . ] Parts and equipment mentioned in this operation manual other than those detailed above are not included. The AC adaptor may be different from the one in the drawing. Optional Accessories Rechargeable Nickel-Metal Hydride Battery (AD-N70BT) Car adaptor (ADCA20X) Cassette adaptor (AD-CT14) Connection Cable (for digital recording) (AD-M1DC) Connection Cable (for digital recording) (AD-M2DC) 2 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Contents , , Important Introduction Special Notes . 8 , , Advanced Features Changing Default Settings . 36-38 Listening through Another System . [. . . ] Web-site: www. sharp. co. uk/support 26 Help Line: 08705 274277 (office hours) , , To display the playing time of an individual track , , Checking the remaining amount of battery level The remaining amount of battery level is shown by the battery indicator ( ) during operation. 1 Whilst in the stop mode, press the or button to display the track number and track name. Useful Features 2 Press the DISP button to display the playing time for that track. Each time the or button is pressed, the playing time of the previous or next track will be displayed. z When the battery is completely discharged, the battery indicator will flash. Recharge the battery or replace the alkaline battery with a new one. z When the battery has run completely out, "BATT EMPTY" will appear. Then, the power will be disconnected automatically. Notes: z If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. z The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. z When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. z The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. Help Line: 08705 274277 (office hours) Web-site: www. sharp. co. uk/support 27 -Checking Displays- Battery Power , , Charging the rechargeable battery When a separately available rechargeable battery is used for the first time or when you use it after a long period of disuse, be sure to charge it fully. 1 Insert the rechargeable battery. A rechargeable battery other than the AD-N70BT cannot be charged. Useful Features -Battery Power- 2 3 Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket. Press the MODE/CHRG button. " " will flash, and battery will begin charging. z After the rechargeable battery is charged or used, it will get slightly warm. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. Advanced Features 2 3 4 Press the menu. or button to display the , , Auto power save Press the MODE/CHRG button to switch items. Press the /:OFF button. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster. ) What is auto power save function? Auto power save function automatically adjusts the sound skip memory storage to be from 5 to 10 seconds depending on playback conditions, this saves battery power. If the MiniDisc unit is used in areas of much vibration, it may be necessary to fix the sound skip memory to 10 seconds "Psave OFF". This will improve performance under difficult conditions but uses more power. (When the AC/car adaptor is used the 10 second mode is always used. ) MENU SETTING ITEM Beep Silent Setting Cancelled Setting Cancelled Setting keep Cancelled BEEP ON BEEP ON* (Confirmation sound) BEEP OFF A-PLAY ON (Auto play) AUTO Psave (Auto power save) D. L MODE 1 (Digital recording level) A-PLAY ON* A-PLAY OFF AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 , , Digital recording level (*) indicates default setting. "D. L MODE 1" The digital recording level you set will be kept even after cancelling recording. "D. L MODE 2" Every time you cancel recording, the level will return to [D. L 0dB]. Help Line: 08705 274277 (office hours) Web-site: www. sharp. co. uk/support 31 -Changing Default Settings- Titling a MiniDisc , , Creating disc and track names Load a MiniDisc to be named. A playback only or recording prevented MiniDisc cannot be edited. 3 Press the DISP button repeatedly to select the type of characters. 1 <Disc name> Whilst in the stop mode, press the EDIT button to select "DISC NAME". <Track name> Whilst in the pause mode, press the EDIT button to select "TRACK NAME". The first 3 characters in the group of the selected characters will be displayed for about 1 second. Advanced Features -Titling a MiniDisc- 2 Press the ENTER/SYNC button. 4 Press the or select the letter. button repeatedly to z The unit will enter the character input mode. z To cancel the operation, press the /:OFF button. 5 Press the ENTER/SYNC button to enter it. 32 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 6 7 8 To enter more letters, repeat steps 3 - 5. [. . . ] If the plugs or sockets are dirty, noise may be heard. Caution: z Do not use chemicals for cleaning (petrol, paint thinner, etc. ). z Do not apply oil to the inside of the unit. It may cause malfunctions. To remove condensation: Remove the MiniDisc and leave the unit for approximately 1 hour. [. . . ]