User manual SHARP DV-25071S/28071S

[. . . ] Laser Diode Properties Material: GaAs Wave length: DVD: 655 nm CD: 790 nm Emission Duration: Continuous Laser output: Max. 0. 8 mW Power Cord Protection To avoid any malfunctions of the VCR/DVD, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. · Keep the AC power cord away from heating appliances. [. . . ] Press DAILY/WEEKLY repeatedly to select DAILY (MOSU), then press the SHOWVIEW button. · FOR WEEKLY RECORDING : To record a TV programme at the same time on the same channel every week. Press DAILY/WEEKLY repeatedly to select WEEKLY, then press the SHOWVIEW button. NOTES: · If the SHOWVIEW number is not available, it will be cleared automatically when you press the SHOWVIEW button. Enter the correct SHOWVIEW number and press the SHOWVIEW button again. · If the SHOWVIEW number flashes when you press the SHOWVIEW button, this means that the SHOWVIEW number you entered was incorrect or the timer recording you just programmed and another timer recording overlap. 4 Confirm the channel number, then press B. · If your local channel information is programmed in VCR/DVD's memory, your local channel number appears automatically. · If your local channel information is not programmed in VCR/DVD's memory, "­ ­" or an incorrect channel number may appear. In this case, press K or L repeatedly until your desired channel number appears. · When you select the channel number using K or L, it memorises in VCR/DVD's memory. NOTES: · Index Search can be set up to 20. · This function will not operate in the Recording mode. · Operations must be followed up within 30 seconds, from steps 2 to 3 . Otherwise the Index Search mode will be cancelled. · To exit the Index Search mode, press MENU in step 2 . Or press STOP after step 3 . Auto Return If there are any remaining programmes including Daily, Everyday and Weekly, AUTO RETURN will not operate. 2 Press K or L repeatedly to point to SET UP, then press B. 3 Press K or L to point to AUTO RETURN, then press B. Watch the Recorded TIMER PROGRAMME Press OPERATE to turn on the VCR/DVD, then press PLAY. VPS (Video Programme System) / PDC (Programme Delivery Control) The Video Programme System (VPS) or the Programme Delivery Control (PDC) is a very convenient system which assures that the TV programmes you have programmed for timer recording, will be recorded exactly from beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension of the programme duration. Also, if a programme is interrupted and, for example, some special news is broadcast, the recording will also be interrupted automatically and resumed when the programme continues. [. . . ] ­Replace the batteries in the remote control. ­Re-insert the batteries with their polarities (+/­ signs) as indicated. Buttons do not work or VCR/DVD stops ­To completely reset the VCR/DVD, unplug the AC responding cord from the AC outlet for 5-10 seconds. VCR/DVD does not respond to some ­Operations may not be permitted by the disc. [. . . ]