User manual SHARP DV-7035S

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13 A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instruction below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: ? [. . . ] 6. Composite Video Output Jack S-Video Output Jack R/L Audio Output Jacks Coaxial Digital Audio Output Jack AV1 (TV) (SCART1) AV2 (SCART2) - 12 - < Display Window 1. 1 below) Indicates the disc played contains DTS Digital audio encoding. Title/Track Number Indicator Some DVDs contain multiple title pages. This indicator displays the title number currently in use or track number (Audio CD) currently playing. 2-3 below) Identifies the inserted disc as Audio CD or Video CD. 4 below) Indicates the played disc contains Dolby Digital audio encoding data. ® ® ® ® 6. 4 below) Identifies the inserted disc as a DVD disc. 6 below) Identifies the inserted disc as a MP3 disc. Analog Audio Output Indicator Indicates the audio sound output from analog audio jacks. Elapsed Playback Time/Remaining Playback Time Indicator Displays elapsed playback time and playback remainder time. Fig. The disc tray is open. The disc tray is being closed. NOTES: i SCART video output and S-Video output cannot be used simultaneously. i The changes of TV output can be made with the disc tray opened status. Press the DISPLAY SET TV OUTPUT button on the remote control and the TV output will be changing in turn as COMPOSITE ßà RGB ßà S-VIDEO - 16 - < AUDIO SETUP There are two available items: They are AUDIO OUT and DOWN MIX. l AUDIO OUT You can choose to send the player' audio signals to an s external receiver using the following outputs: l DOWN MIX Pro Logic Please connect to a built-in Dolby Pro Logic receiver or amplifier to enjoy the Dolby Pro Logic surround sound. ?? STEREO Down mixed Stereo L/R audio output. - - AUDIO SETUP PAGE - AUDIO OUT DOWNMIX MAIN PAGE ? ANALOG: Audio signals are sent using stereo (L/R) audio terminals. Selecting this choice will disable the digital audio outputs. ? Pro Logic STEREO BITSTREAM: Set to this selection will output the raw bit stream signal of Dolby Digital or DTS from the coaxial jack. In order to enjoy Dolby Digital DTS discs, this unit' s digital output jack must be connected to the digital-input jack of a Dolby Digital or DTS compatible receiver or processor. ® ® ® SET DOWNMIX MODE ? D-PCM: PCM stands for Pulse Code Modulation and is digital audio. Connecting this unit to an amplifier with a built-in D/A converter can play the same digital audio format as on CDs. Additionally, 2-channel analog audio will output from the audio output jacks of amplifier. < DOLBY DIGITAL SETUP There are two available items: They are DUAL MONO and DYNAMIC. l DUAL MONO There are four available modes: STEREO, L-MONO, R-MONO, and MIX-MONO. - - DOLBY DIGITAL SETUP - - - - AUDIO SETUP PAGE - AUDIO OUT DOWNMIX MAIN PAGE ANALOG BITSTREAM D-PCM DUAL MONO DYNAMIC MAIN PAGE STEREO L-MONO R-MONO MIX-MONO DUAL MONO (1 + 1) SETUP SELECT AUDIO OUTPUT Audio output description NOTES: i i Analog and digital audio signals cannot output simultaneously. Do not play the Dolby® Digital or DTS® or MPEG audio sound tracks on an audio component without having a built-in Dolby® Digital or DTS or MPEG audio decoder. [. . . ] If the remedies indicated in the chart below do not solve the problem, please consult your dealer for instructions. Common Symptom No power Power turn off Disc tray can't close ü ü ü ü ü ü Possible Cause Power cord is not properly connected to the power outlet Auto power off function Disc is not properly placed Power is OFF No disc is inserted ("no disc" will be shown on screen). ("No disc" is shown on screen). Dirty disk Deformed disk Condensation in unit Poor disc Video CD (MPEG1) Slow or fast playback Audio terminals are not connected. [. . . ]