User manual SHARP DV-HR300F

[. . . ] · Keep the AC power cord away from heating appliances. · Never put any heavy object on the AC power cord. · Do not bundle any cables such as; AC power cord, Round Coaxial cable or other cables that are used to connect this VCR/DVD to your TV together. The noise or disturbance of the picture may be generated. [. . . ] Press VCR or DVD on the remote control to select your desired mode before you operate. After an OTR and a Timer Recording has been set, this VCR/DVD operates as follows: · When Timer Recordings are set, the TIMER indicator on the front panel and " " will appear. To use the VCR as usual until the time for the recording, press TIMER ON/OFF so that the TIMER indicator on the front panel and " " disappear. Select either VCR or DVD mode, then continue with the other features as described in this manual. While OTR or Timer Recording is performing. · If a tape runs out before an OTR or a Timer Recording is finished, the VCR/DVD ejects the tape and switches to the DVD mode automatically. Press TIMER ON/OFF on the remote control or STOP C/EJECT A on the VCR/DVD, then press VCR to activate the VCR function again. · If you want to use the VCR/DVD during a Timer Recording or while " ·" " will not appear in the DVD mode. However, the Timer Recordings will remain as programmed. " is on or flashing, Press OPERATE to turn on the VCR/DVD. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don't need to set the TIMER off to use the DVD. · Once the VCR/DVD turns to the timer standby mode, no VCR functions are available until TIMER ON/OFF is pressed. (OUTPUT on the front panel and VCR on the remote control will not function. ) ­ 17 ­ EN VCR FUNCTIONS · You can programme one year in advance. · You can also select the recording routine option by pressing Cursor K / L when the month digit is flashing. Those programmes can only set a recording according to the same channel at the same time. - For daily recording : Select "MO-FR" to recording from Monday through Friday. Insert a disc with label facing up. 7. To Stop Recording. To Stop Playback. 3. Press 0, 0, 4 to select DISC. DISC or TV Screen Hint · Press STILL/PAUSE F at the point where you want to start recording when you do dubbing middle of the DVD. · To stop recording temporarily, press STILL/PAUSE F after press VCR. Press STILL/PAUSE F again to resume recording. 4. Select the desired tape speed. Tape Type Tape S peed E -60 E -120 E -180 E -240 R ecording / P layback Time S P Mode LP Mode 1 hour 2 hours 2 hours 4 hours 3 hours 6 hours 4 hours 8 hours VCR FUNCTIONS SP Copying a Video Tape Warning: Unauthorised recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR/DVD(this unit), playing VCR(another VCR) and your TV as outline in the following diagram. Scart cable (commercially available) (Back of Recording VCR/DVD) (Back of TV) AERIAL To SCART terminal RF OUT To SCART terminal (Back of another source) Scart cable (commercially available) 1. Insert a pre-recorded tape into the playing VCR. Insert a tape with its erase-protection tab into the recording VCR/DVD. Press TAPE SPEED/SYSTEM on the remote control of the recording VCR/DVD to select the desired recording speed (SP/LP). Select the "AV2" or "AV3" position on the recording VCR/DVD. · To use the input jack on the back of this VCR/DVD, select "AV2" position by pressing 0, 0, 2 on the remote control or CH K / L. [. . . ] · This happens right after fast forwarding or rewinding. Audio or subtitle language does not · The selected language is not available for audio or subtitles on the DVD. The camera angle cannot be · The DVD does not contain sequences recorded from different camera angles. Audio or subtitle language cannot be · The DVD does not contain audio source or subtitles in the selected language. [. . . ]