User manual SHARP DV-NC150U

[. . . ] VCR/DVD COMBINATION Precautions OPERATION MANUAL Please read this Operation Manual carefully before using your VCR/DVD COMBINATION. iNSTRUCCIONES EN ESPAÑOL INCLUIDAS. 1 The region number for this VCR/DVD is 1. basic TV Connection Cable Signal Antenna or (Back of TV) Cable Signal Antenna (Back of VCR/DVD) or Disconnect Connect 2 ANT-IN ANT-OUT Connect Round Coaxial cable (supplied) 3 From VCR/DVD From TV 5 Please refer to "Connections" on page 7. [. . . ] Then, enter correct numbers by pressing the K or L button. € You may cancel the entire program by pressing the s button while the program number flashes. 6) Press the SUBTITLE/T-SET button to return to timer stand-by mode. Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY” 7 Repeat the procedure in steps 5 and 6 to set the end time. 4 Select the desired month ONE TIME PROGRAM or PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME – – : – – – – END TIME – – : – – – – CHANNEL –– REC SPEED – – 8 or ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED – – Select the desired day or • You can program one year in advance. Select the desired channel • If you have connected the VCR/DVD to a cable box or satellite box as the Connection A on page 8, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording. € 14 – To cancel a Timer Recording in progress Press the STOP/EJECT button on the VCR/DVD. EN Hint for Timer Recording • If there is a power failure or the VCR/DVD has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. € If a tape is not in the VCR/DVD or does not have the record tab, the TIMER and lights flash and timer recording cannot be performed. € If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER and lights flash. (If the DVD power is off, the VCR will become STANDBY status). € When all timer recordings are finished, the TIMER and lights will flash. € When timer recordings are set, theTIMER and lights will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T-SET button so that the TIMER and lights disappear. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual. If you want to use the DVD player during a VCR timer recording or while the TIMER and lights are on or flashes. € You can use the DVD player while the TIMER and lights are on or flashes, or during a timer recording. Press the POWER button to turn on the VCR/DVD. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. [. . . ] Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations. Playback from a desired track and random playback are not available during program playback. Some functions are prohibited on some discs. [. . . ]