User manual SHARP DV-SL10X

[. . . ] DVD Video Player MODEL DV-SL10X OPERATION MANUAL DVD / CD / VIDEO CD PLAYER OPERATE OPEN/CLOSE PLAY STOP SKIP REW FWD Please read this Operation Manual carefully before using your DVD Video player. The region number for this DVD player is 4. 4 NTSC/PAL SAFETY INFORMATION Note: This Player can be used only where the power supply is AC 220V-240V, 50Hz. It cannot be used elsewhere. Power Cord Protection To avoid any malfunctions of the Player, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. · Keep the AC power cord away from heating appliances. [. . . ] When you reach the desired speed, release the button. The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 2 Press ZOOM repeatedly to select the required · For video CDs, the speed is fixed at x2, x8 or x30. · For audio CDs, the speed is fixed at x16. · For MP3, the speed is fixed at x8. 2 To return to normal playback, press PLAY. zoom factor: x2, x4 or OFF. 3 Use Arrow ( L / K / B / s ) to move the zoomed picture across the screen. 4 To exit zoom mode, press ZOOM to OFF. NOTES: Slow Forward / Slow Reverse DVD DVD-RW VR mode VCD · Zooming function does not work while disc menu is shown. · x4 zoom is not available on some discs. · Only x2 zooming is available for VCD. 1 During playback, press STILL/PAUSE. · Slow motion playback will begin and sound will be muted. 3 Press FWDg or REVh repeatedly to select Track CD VCD without PBC function the required speed: 1/16, 1/8, 1/2 of the normal playback. · If you are using FWD g or REV h on the front panel, press and hold it for more than 1. 5 sec (the longer you hold it, the slower the speed will be). There are three ways to begin playback on an Audio CD at a specific Track. Using the Numerical key pad 1 Press the numerical key pad to enter the desired Track number. · Playback will start at the selected track. · For single digit tracks (1-9), press a single number (eg. · To play track 26, press +10, 2, 6 on the numerical button. When you reach the desired speed, release the button. 4 To return to normal playback, press PLAY. · You cannot play the VCD in reverse slow motion. Using the DIRECT SKIP. 1 Press DIRECT SKIP. · The track search display appears. 2 Within 30 seconds, select a desired track number using numerical buttons. For single digits press "0" first. · Playback will start at the selected track. Using the SKIP H G During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. · Track number will appear briefly on the DVD display panel. · If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE: · SKIP H G are not available when playback is stopped. ­ 14 ­ EN PLAYING A DISC Title / Chapter Search Repeat DVD DVD-RW VR mode · REPEAT are available only during playback. 1 Press DIRECT SKIP once for the Chapter search, REPEAT TITLE / CHAPTER twice for the Title search during playback. /2 DVD DVD-RW VR mode 2 Enter the desired chapter/title number using the To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. [. . . ] Buttons do not work or player stops ­To completely reset the player, unplug the AC responding cord from the AC outlet for 5-10 seconds. Player does not respond to some ­Operations may not be permitted by the disc. DVD player cannot read ­Use a commonly available cleaning CD/DVD to CDs/DVDs clean the lens before sending the DVD player for repair. NOTES: Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations. [. . . ]