User manual SHARP DV-SL80U

[. . . ] POWER PLAY STOP SKIP OPEN/CLOSE REV FWD Please read this Operation Manual carefully before using your DVD Video Player. 1 For future reference, record the serial number (located on the rear of the Unit) in the space provided. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit. [. . . ] Press SKIP H to go back to the beginning of the current track. press it repeatedly to go to the previous tracks. €¢ Track number will appear briefly on the DVD display panel. €¢ If SKIP H G is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE: • SKIP H G are not available when playback is stopped. €“ 11 – EN PLAYING A DISC Title / Chapter Search A-B REPEAT DVD 1 Press SEARCH MODE repeatedly until the Chapter or Title search screen appears. 2 Enter the desired chapter/title number using the numerical buttons. /2 DVD-RW VR mode DVD DVD-RW VR mode CD NOTE: • Depending on the disc being played, this function can also be performed by directly entering the desired chapter number using numerical buttons. Refer to the manual accompanying the disc. 1 Press A-B REPEAT at your chosen starting point. • A- appears briefly on the TV screen. 2 Press A-B REPEAT again at your chosen end point. €¢ A-B appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence , press A-B REPEAT. NOTES: • The A-B REPEAT section can only be set within the current title (for DVDs), or current track (for audio CDs). €¢ A-B REPEAT is not available with some scenes in DVD. €¢ To cancel the A point which was set, press CLEAR. €¢ A-B REPEAT playback does not function during title, chapter, track or all repeat playback. Time Search DVD DVD-RW VR mode CD 1 Press SEARCH MODE repeatedly until the Time Search screen appears. 2 Within 30 seconds, enter a desired disc time using the numerical buttons. • Playback will start at the specified time. €¢ When there is no need to enter a number, “0” appears automatically. [. . . ] ) For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website (http://www. Make your contribution to the environment!€¢ Used up batteries do not belong in the dust bin. €¢ You can dispose of them at a collection point for used up batteries or special waste. [. . . ]