User manual SHARP DV-SV80S(S)

[. . . ] SAFETY INFORMATION This equipment complies with the requirements of Directives 83/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gert entspricht den Anforderungen der EGRichtlinen 89/336/EWG und 73/23/EWG mit nderung 93/68/EWG. Ce matriel rpond aux exigences contenues dans les directives 83/336/CEE et 73/23/CEE modifie par la directive 93/68/EEC. Dit apparaat voldoet aan de eisen van de richtlijnen 83/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEC. [. . . ] 2x is displayed on the screen and the picture is now larger. By pressing ZOOM key consecutively you can reach 3x, 4x modes. 4x, 1/2x , 1/3x , 1/ NOTE: In some cases, the subtitle language is not changed immediately to the selected one. For your convenience: When the preferred language is not selected even after pressing the button several times, it means that the language is not available on the disc. When the player is restarted or the disc is changed, the subtitle selection is automatically changed back to the initial settings. If a language is selected, which is not supported by the disc, the subtitle language will automatically be set to the discs priority language. Usually a circulation will happen while switching to another language, that is you can cancel the subtitle by pressing this button a number of times until Subtitle Off appears on the screen. Changing Audio Soundtrack Language It is possible to change the audio language from the one selected at the initial settings to a different language, if available. (This operation works only with discs on which multiple audio soundtrack languages are recorded, if not prohibited by the DVD. ) Press AUDIO during play. NOTE: You can move in the picture i. e. change the zoomed location by using the 3 (Left) /4(Right) /6(Down) / 5(Up) arrow keys. To return to normal play Press ZOOM again. Press AUDIO a number of times until the preferred language is selected. For your convenience: When the preferred language is not selected even after pressing the button several times, it means that the language is not available on the disc. When the power is turned on or the disc is removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard. Displaying / Changing Subtitle Language It is possible to change the subtitle language from the one selected at the initial settings to a different language, if available. (This operation works only with discs on which multiple subtitle languages are recorded. ) Press SUBTITLE during play. When no subtitles are recorded instead of the selected language. will be displayed Viewing From Another Angle Some DVD discs may contain scenes, which have been shot simultaneously from a number of different angles. For these discs, the same scenes can be viewed from each of these different angles using the ANGLE button. The number of recorded angles differs depending on the disc used. y/x is displayed shortly on the screen during playback. This indicates that the multi-angle scene has just started. Also on units display ANGLE message appears. From that moment on, the yth angle of total x angles is played and you can change the viewing angle until the end of the multi-angle scene. Press SUBTITLE a number of times until the preferred language is selected. [. . . ] (By connecting a DTS Digital Surround decoder, you can also listen to DTS Digital Surround sound. ) DVD This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG II) and high-density recording technology. DVD enables aesthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded). Playback Control This is recorded on a Video CD (Version 2. 0). [. . . ]