User manual SHARP DV-5107H OPERATION MANUAL

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: !Reorient or relocate the receiving antenna. [. . . ] OFF. You can switch the display brightness by pressing the DIMMER button. Each time the button is pressed, the display brightness changes in the following order. Brightened Dimmed Dimmed further 21 - General control - " To change the display brightness (3 levels) Preparation for Use DV-5107H Playing a disc Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accordingly. 1 Press the POWER switch on the main unit to turn the power on. While the stand-by indicator is lit (in the stand-by mode), the unit can be turned on with the ON/STAND-BY button on the remote control. DVD Video CD CD Audio Visual Entertainment 2 3 Press the OPEN/CLOSE button to open the disc tray. Place the disc on the disc tray, label side up. !To set a disc to a different disc tray, press the DISC SKIP button to turn the disc tray, then place the disc in the open position. Be sure to place 3" (8 cm) discs in the middle of the disc positions. DVD Operation Label side - Playing a disc - Disc tray 4 5 Press the OPEN/CLOSE button to close the disc tray. If the disc you are using supports auto start, it starts playing automatically (even if you do not press the PLAY ( / ) button), as soon as you close the disc tray. Selected disc number To select the disc you want to play first, press one of the 1 - 5 buttons on the main unit. This can be operated by pressing the SHIFT button and one of the 1 - 5 buttons on the remote control at the same time. SHARP 9HX55769150 Selected disc type 6 If you cannot start playback in step 4, press the ton. PLAY ( / ) but- Title and Chapter (Track) No. Playing Time When the menu screen appears, select an item using the , , then press the ENTER button. or button and 22 DV-5107H " To interrupt playback Press the PLAY ( / ) button. To resume playback from the same point, press the PLAY ( / ) button. " To resume playback after stopping (resume playback) You can resume playback from the point that the playback is stopped. " To stop playback DVD: Press the STOP ( ) button twice. Resume play starts when you press it once. SVCD/VCD/CD/MP3/JPEG: Press the STOP ( ) button. When the unit is left unoperated for more than 5 minutes after pressing the stop button, a screen saver appears. Press any button on the main unit or remote control. The startup screen returns. 1 2 While the disc is playing, press the STOP ( ) button. The system stores the point you stopped. Resume To restart play, press the ( / ) button. PLAY Resume Play resumes from the point you stopped. Some discs do not display the chapter (track). On a DVD, skip does not operate between titles. When operating SVCD/VCD with the P . B. C. function, set the sequential play mode to SEQ. 2 (see page 30). SHARP 9HX55769150 24 DV-5107H " Fast forward/Fast reverse (search) You can search the desired point as you play the disc. " To start playback from the desired point (direct play) You can playback from desired title (track). 1 While a disc is playing, press the or button. Fast Play While in the stop or playback mode, press the direct number buttons (0 - 9) to select the title (track) number. Playback starts in 3 seconds. To enter title (track) numbers of 2 digits or more, press the direct number buttons within 2 seconds. The scanning speed will change as follows at each press of the button. Fast Play / Fast Back Play Scan Forward 1 / Scan Backward 1 Scan Forward 2 / Scan Backward 2 Scan Forward 3 / Scan Backward 3 (Only for DVD) Scan Forward 4 / Scan Backward 4 (Only for DVD) Play The disc is forwarded by the button and reversed by the button. Notes: !The direct play function is not performed with discs on which no titles (tracks) are recorded. Direct play feature is disabled on some discs. Playback starts from the first chapter of the title. Playback does not start if you specify a title (track) number that is not listed on the disc. When operating SVCD/VCD with the P . B. C. function, set the sequential play mode to SEQ. 2 (see page 30). DVD Operation 2 Press the / button to return to the normal playback. " To select a subtitle or audio language from the disc menu You can select the desired subtitle or audio language and sound system on your DVD if it has a disc menu. Notes: ! [. . . ] As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Power source Power consumption Dimensions AC 120 V, 60 Hz 16 W Width: 17-5/16" (430 mm) Height: 2-15/16" (86 mm) Depth: 11-1/8" (394 mm) 6. 8 lbs. [. . . ]