User manual SHARP DV-740 OPERATION MANUAL

[. . . ] SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 1. 6 A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] 6 below) Identifies the inserted disc as a MP3 disc. Analog Audio Output Indicator Indicates the audio sound output from analog audio jacks. Elapsed Playback Time/Remaining Playback Time Indicator Displays elapsed playback time and playback remainder time. Fig. The disc tray is open. The disc tray is being closed. The system is loading information from the disc. Bad disc or Wrong region disc is being loaded. - 13 - CONNECTIONS < Video Output Terminals and Connections l Composite Video Output Terminal Composite video output is the most commonly used video connection in use today and is supported by most televisions and A/V receivers. Composite video is set to display without user setup. l S-Video Output Terminal You will want to use S-video output with televisions or monitors equipped with an S-video input whenever component video inputs are not available. To activate the S-video output, you must set the DVD player' "TV SETUP PAGE"/ "SCART OUT" setting s to S-VIDEO (Refer to p. 16). NOTE: i S-video cable is not included with this player. l SCART Terminal The SCART terminal can be connected to the TV set equipped with SCART connectors. The audio transmitted on the SCART is stereo sound. Whenever the SCART terminal is used, you must set the DVD player' "TV SETUP PAGE"/ s "SCART OUT" setting to "RGB" (Refer to p. 16). NOTE: i For selected TVs, when the TV set is at standby mode, power on the DVD player will automatically power on the TV and switch to the SCART video input channel. WARNING: 1. S-Video and SCART/RGB video cannot output signals simultaneously. When DVD player is in POWER OFF status, the LOOP THROUGH function does not work with RGB mode. - 14 - < Audio Output Terminals and Connections l Down-Mixed Audio Output Terminals (L/R) Use down-mixed (stereo) audio output terminals for connection with your television or other non-Dolby ® ® Digital A/V receivers or amplifiers. These terminals provide down-mixed Dolby Digital audio signals for standard 2-channel playback. l Coaxial Digital Audio Output Terminals Use digital audio outputs for connection with an external Dolby Digital or DTS decoder. To use the coaxial output, you will need to purchase a coaxial cable. ® ® Note: i Digital cable is not included with this player. - 15 - INITIAL SETTING Press the SETUP button on the remote controller to set up the initial setting. The On-Screen Display (OSD) will display below: SETUP MENU - - MAIN PAGE TV SETUP AUDIO SETUP DOLBY DIGITAL SETUP AUDIO EFFECT SETUP LPCM SETUP GENERAL SETUP PREFERENCES EXIT SETUP GOTO TV SETUP l TV TYPE MULTI The DVD player will choose the correct system to display the playback of inserted disc. ?? NTSC The DVD player will output in NTSC format regardless of what format the disc was designed for. PAL The DVD player will output in PAL format regardless of what format the disc was designed for. - - TV SETUP PAGE - - < TV SETUP There are three available items: They are TV DISPLAY, TV TYPE, and SCART OUT. TV DISPLAY TV TYPE SCART OUT MAIN PAGE MULTI NTSC PAL - - TV SETUP PAGE - TV DISPLAY TV TYPE SCART OUT MAIN PAGE NORMAL/PS NORMAL/LB WIDE SET TV STANDARD l SCART OUT The SCART OUT terminal has three kinds of output ways; they are COMPOSITE, RGB, and S-VIDEO. If you are using S-video output, please set this setting to "S-VIDEO". If you are using SCART output, you can choose one of these three kinds output ways, which matches with your TV' SCART input. s - - TV SETUP PAGE - TV DISPLAY TV TYPE SCART OUT MAIN PAGE SET TV DISPLAY MODE l TV DISPLAY NORMAL/PS 4:3 Pan & Scan video output for a normal TV set NORMAL/LB 4:3 Letterbox video output for a normal TV set WIDE 16:9 Wide Screen video output for a wide screen TV set ?? COMPOSITE RGB S-VIDEO NOTES: i Aspect ratios available for playback will be printed on the DVD rear packaging. [. . . ] TV volume is too low Wrong AUDIO OUTPUT setting Disconnection of video equipment Wrong output setting of VIDEO OUTPUT No batteries in remote control Dead batteries Remote control not being pointed at the remote sensor ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Remedy Make sure there is a connection between the power cord and the outlet. The power is automatically turned off after 20 minutes have elapsed in the stop mode (auto power off function). Turn power on for 1-2 hours before using the unit. Replace disc Playback with DVD format Press [PLAY] to resume normal playback Check audio connections Adjust TV volume Check AUDIO OUTPUT setting Check video connections Check video output setting of VIDEO OUTPUT in GENERAL SETUP Put in new batteries Replace batteries Point the remote control at the remote sensor No playback ü ü ü Unwanted mosaic-like garbage ü display during playback ü ü ü No audio ü ü No Video Remote control unit does not work ü ü ü ü ü DVD Symptom Does not play, even when a title is selected Audio or subtitle language is not the one selected during the initial setting. [. . . ]