User manual SHARP DX-112H

[. . . ] If you need a kit but cannot find it available, call our toll-free "HELP" line (1-800-645-4994). UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE 1. Remove the detachable front panel to prevent damage to the face and/or controls; use the Release (REL) button to allow the panel to fold down. Then withdraw the panel from the mounting plate. Slide the mounting sleeve off of the chassis. [. . . ] Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong local stations into the pre-set memory positions for that band. LOC will appear on the display as tuning occurs. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new stronger stations. This feature is most useful when traveling in a new area where you are not familiar with the local stations. bp LIQUID CRYSTAL DISPLAY PANEL fortable listening, the stereo indication will appear intermittently or not at all; if an AM or monaural signal is received, the icon will disappear from the display panel. bq FUNCTION DISPLAY The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD readout will return to normal when the temperature increases to a normal range. The Function Display consists of a single bar graph which displays a bar graph which provides a visual representation of the audio signal power level. As the volume is increased, the number of illuminated segments will increase. bo FM STEREO/LOCAL (LOC) INDICATIONS To manually set any of the 6 pre-set memory buttons, use the following procedure: 1. Turn the unit on and select the desired band. When the button is pressed, A --in appears on the display panel. PROGRAMMED PLAY SELECTOR (PGM) When the auxiliary input is being used, no other To play the tracks in the selected order after audio input sources (radio or CD) are operational. programming is completed, press the ProPANEL DISC SELECT (DISC SEL) BUTTON grammed Play button so that the PGM indication appears on the display panel. Play The back of the front panel contains a DISC SEL will begin of the first track selected in button which is used in conjunction with the disc the programmed order. During Pro- number LCD and Disc Eject ( ) button to select grammed Play mode, the Track Select func- a particular CD you wish to remove and/or replace. tions will operate in the programmed order When the DISC SEL button is pressed, the disc instead of the normal progression. Track number display to the left sequences through Scan and Track Repeat can be selected discs 1-5. Stop at the number disc you wish to during Programmed Play and will operate eject and press the eject button. on the programmed tracks. (TUNE/TRK) and press the MEMory Selector button. The indication M - 01 will momentarily appear on the display panel, indicating that the selected track has been entered as the first one to be played in Programmed Play mode. Select the second track to be programmed (this could be on another disc) using the Track Select button and then press the Memory Selector button. [. . . ] Do not attempt to open the unit chassis. There are no user serviceable parts or adjustments inside. When the vehicle warms up during cold weather or under damp conditions, moisture may condense on the lens of the disc player. Should this occur, the player will not operate properly until the moisture has evaporated. [. . . ]