User manual SHARP ER-41SL2

[. . . ] Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code below. DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur. [. . . ] operation Guide for fax (on the AL-2051_ER-41SL2 User Documentation CD-ROM) This manual explains the procedures for using the machine as a fax machine. This manual only explains the fax functions of the machine. For general information on using the machine, including safety information, installation, paper loading, removal of paper misfeeds, and peripheral equipment, see the operation guide for the machine. About the scan head The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated). The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate unit trouble. Plug one end of the telephone line cord into the jack on the machine marked "LINE. " Plug the other side into a standard (RJ11C) single-line telephone wall jack. Be sure not to plug this telephone line cord into the "TEL" jack. The "TEL" jack is used to attach an extension telephone or answering machine to the machine. the performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. When ordering supplies, please use the correct part numbers as listed below. supply list Be sure to use only genuine SHARP parts and supplies. Supply TD cartridge Drum cartridge Part number AL-214TD AL-100DR Usable life Approx. For best copying results, be sure to use only SHARP products. Only genuine SHARP consumables carry the Genuine Supplies label. Based on copying onto A4-size paper at 5% toned area (The life of the TD cartridge which has been included in the unit at the factory is approximately 2, 000 sheets. The MSDS (Material Safety Data Sheet) can be viewed at the following URL address: http:// www. Each instruction also covers the optional units used with the product. Do not install the machine in a location with poor air circulation. [. . . ] Never install telephone sockets in wet locations unless the socket is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using a telephone (other than a cordless type) during an electrical storm. [. . . ]