User manual SHARP ER-87MA

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] " screen will be displayed , requiring you to set Country , Teletext Language and Scan Encrypted options. You can select frequency ranges from this screen. For highlighting lines you see, use " " or " " button. You can enter the frequency range manually by using the numeric buttons on the remote control. set Start and Stop Frequency as desired by using numeric buttons on the remote control. After this operation, you can set Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz, the Tv will perform search process in a detailed way. If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts. Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. After all the available stations are stored, Channel List will be displayed on the screen. analogue fine tune screen will be displayed. Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored. Use this setting to clear channels stored. Select Network Channel Scan from the installation menu by using " " or " " and OK buttons. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. 9' replaces the highlighted character with the characters printed above the button one by one as the button is pressed. You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. ⷠSelect the channel that you want to lock and select Lock option. You will be asked to enter parental control PIN. Use CH /CH buttons to move page up or down. Lock symbol will be displayed next to the selected channel. [. . . ] When connecting devices to your TV's connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. Note: It is not guaranteed that all DivX® formats are supported. Your TV is capable of finding and updating new software upgrades over broadcast channels. ⷠFor broadcast channels search, TV looks the available channels stored in your settings. [. . . ]