User manual SHARP FO-2080

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. [. . . ] If you allow polling an unlimited number of times, the document will remain in memory until you clear it as explained in the following section, Clearing a document. 89 5. Special Functions Polling 1 Load the document. 2 3 Set the reception mode to AUTO (press the FUNCTION key, 1 and 1). Press these keys: The display will show: 9:MEMORY POLL MODE ENTER #(1-2, *, #) FUNCTION 1 9 1 FUNCTION 4 Press 1 to select SET. · If another document has already been stored, press 1 to select APPEND, and go to Step 6. 1 5 Press 1 to allow polling only once, or 2 to allow polling an unlimited number of times. Adjust the resolution and or contrast if desired, and then press the START key. RESOLUTION 1 TIME REPEAT or 1 2 START 6 CONTRAST Q 7 Press the START key. · The document will be scanned into memory, and your fax will go on polling standby. START 90 Polling Clearing a document To clear a memory poll document (or documents) from memory, follow the steps below: 1 Press these keys: The display will show: 9:MEMORY POLL MODE ENTER #(1-2, *, #) FUNCTION 9 2 Press 2 to select CLEAR. 2 START 3 Press START to clear the documents. Polling Security Polling Security allows you to prevent unauthorized polling of your fax. When this function is activated, polling will only take place when one of the following conditions is met: The fax number of the polling fax machine has been stored in your fax's list of permitted fax numbers (called "passcode numbers"). The polling fax must also have its fax number programmed in itself, as described in Entering Your Name and Fax Number in Chapter 1. A System number has been programmed in the polling fax machine which matches your fax's System number or one of your ID numbers. An ID number has been programmed in the polling fax machine which matches your fax's System number. 91 5. POWER SAVE MODE will appear in the display. POWER SAVE MODE ON POWER SAVE POWER SAVE MODE To turn off Power Save Mode, press the POWER SAVE key once again. POWER SAVE MODE OFF will appear briefly, followed by the normal date and time display. 97 5. Special Functions Power Save Mode Turning on Power Save Mode when TIMER is selected When TIMER is selected, Power Save Mode turns on and off automatically at the times you specify. Follow the steps below to set the on and off times. 1 Press the POWER SAVE key. POWER SAVE The display will show: POWER SAVE MODE 1=TIMER ON, 2=SET 2 Press 2 to select SET. · Note: If you have already entered the timer settings and simply wish to turn on the timer, press 1 (TIMER ON). 2 3 Enter the time you want Power Save Mode to turn on every day (START TIME). Enter two digits for the hour (01 to 12) and two digits for the minute (00 to 59). or # for P. M. 0 5 0 0 Example: 5:00 P . M. 98 Power Save Mode 4 Enter the time you want Power Save Mode to turn off every day (END TIME). Enter two digits for the hour (01 to 12) and two digits for the minute (00 to 59). or # for P. M. 0 8 0 0 Example: 8:00 A. M. 5 Press the START key. START Note: The above daily time settings will be in effect every day and are required. The following WEEKEND and PERIOD settings are optional, and are used to set additional weekly and yearly time periods that Power Save Mode will turn on. 5. Special Functions The display will show: WEEKEND SETTING 1=YES, 2=NO 6 Press 1 if you want to set a day or days of the week (such as the weekend) that you want Power Save Mode to turn on. [. . . ] Have victim look right and left, and, then up and down. If irritation does occur, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye(s). Section 6. Physical Chemical Characteristics Boiling Point Melting Point Vapor Pressure Vapor Density Evaporation Rate Appearance : : : : : : Not applicable No data available Not applicable Not applicable Not applicable Powder : : : : : : Odor Specific Gravity Solubility in Water PH Viscosity Color : : : : : : Faint odor 1. 2 Negligible Not applicable Not applcable Black Section 7. [. . . ]