User manual SHARP FO-4470

[. . . ] WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 5 6 Press 1 to allow polling only once, or 2 to allow polling an unlimited number of times. RESOLUTION CONTRAST Press and/or to adjust the resolution and contrast if desired, and then press START/ ENTER . € The document will be scanned into memory, and your fax will go on polling standby. Clearing a document To clear a memory poll document from memory, follow the steps below: 1 Press MENU and then 7 . 76 Polling Polling Security Polling Security allows you to prevent unauthorized polling of your machine. When this function is activated, polling will only take place when the fax number of the polling fax machine has been stored in your machine’s list of permitted fax numbers (called "passcode numbers"). The polling machine must also have its fax number programmed in itself, as explained in Entering Your Name and Fax Number in Chapter 1. Turning Polling Security on and off Polling Security is turned on or off with Option Setting 8 as explained on page 109. Storing and clearing fax numbers for polling permission You can store up to 10 fax numbers in your machine’s list of permitted numbers. This number identifies the fax number you will enter in the next step. Clearing: Enter the 2-digit number which identifies the fax number you want to clear, and go to Step 5. Return to Step 3 to enter (or clear) another number, or press repeatedly to return to the date and time display. Special Functions Timer Operations Timer Operations The Timer function allows you to store a job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance. You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed. Cannot be used for a timer transmission. Initial procedure To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages). Enter a number as follows to select the desired operation (or scroll to the desired operation with or and press START/ ENTER ). 1 2 3 4 5 Transmission (SEND MODE) Confidential transmission Polling Serial Polling Broadcasting 4 Enter a two-digit number for the hour (“01” to “12”) and a two-digit number for the minute (“00” to “59”). Enter a number as follows to select the day of the operation (skip this step if the operation will be performed within the next 24 hours): 0 1 2 3 4 5 6 Sunday Monday Tuesday Wednesday Thursday Friday Saturday 7 Press START/ ENTER and go to the specific procedure for your operation (see the following pages). transmission (Continued from Initial procedure. [. . . ] This information is supplied to us by the manufacturer and Sharp offers no warranties as to its accuracy and accepts no responsibilities for any typographical errors which may appear on these sheets. It is the responsibility of the user to determine the suitability of this product for each particular use. 1-1993 ISO 11014-1 Commission Directive 91/155/EEC The Material Safety Data sheet: A Practical Guide to First Aid: Canadian Centre for Occupational Health and Safety's publication HMIS IMPLEMENTATION MANUAL: National Paint & Coatings association IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. Rivision Record: July / 22/2002 Addition : Product Name FO-44ND / FO-50ND 137 QUICK REFERENCE GUIDE SENDING FAXES Place the document (up to 50 letter-size pages) face down in the document feeder. [. . . ]