User manual SHARP FO3800M OPERATION MANUAL PAGES 121-130

[. . . ] operties Click the Details tab (Ports tab ­ on Windows NT4. 0) in the Properties Ports window, select LPT1 (or the currently used port), and click the OK button. To use the AL-F_FO again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. TROUBLE? 2 3 4 5 6 13 121 30/03/00, 17:42 UK 13 TROUBLE LEO. p65 121 Using other installed drivers Windows Windows 3. 1x: 1 Double-click the Control Panel icon in the Main window of Program Control Panel Manager. Printers Select AL-F_FO and then click the Connect button. [. . . ] The performance specification figures indicated are nominal values of production machines. There may be some deviations from these values in individual machines. 14 124 SUK 14 SPECIFICATIONS LEO. p65 124 SPECIFICATIONS 30/03/00, 17:27 Copier specifications Type Copy system Originals Original size Copy sizes Digital laser multifunction, desk-top type Dry, electrostatic transfer Sheets, bound documents Max. A4 A6 to A4 (Feed copy paper lengthwise only. ) Image loss: Max. 3 mm (either of the other edges) 8 copies/min. (normal copying mode) Variable: 50% to 200% in 1% increments (total 151 steps) Fixed: 50%, 70%, 86%, 100%, 141%, 200% Moving optical source, slit exposure (stationary platen) with automatic exposure / SPF: Moving original One paper tray with automatic feed (250 sheets) Heat pressure roller method Non magnetic mono component development system Fluorescent lamps 600 dpi Local voltage ±10% (For this copiers power supply requirements, see the name plate located on the back of the unit. ) Max. 13 kg TD and drum cartridges included 460 mm (W) x 425 mm (D) x 307 mm (H) Temperature: 10°C to 35°C Humidity 20% to 80% (max. 60% at 35°C) Sound Power Level LWA (1B=10dB) Copying: 6. 7 [B (A)], Standby: Background noise level Copy speed Continuous copying First-copy time Copy ratio Exposure system Copy paper feed Fusing system Development system Light source Resolution Power supply Power consumption Overall dimensions Weight Copier dimensions Operating conditions Noise level 14 Sound Pressure Level LPA (bystander positions) Copying: 49 [dB (A)], Standby: Background noise level Noise emission measurement in accordance with ISO 7779. First-copy timemay differ depending on operating conditions, such as power-supply votage and room temperature. Thevalues forcopy speed are rounded to the nearest whole number. SPECIFICATIONS 125 30/03/00, 17:27 SUK 14 SPECIFICATIONS LEO. p65 125 Paper Type of media Standard paper and thick paper Size Weight 56 to 80 g/m² Paper capacity : 250 sheets 80 to 90 g/m² Paper capacity : 200 sheets 52 to 130 g/m² ** A4 B5 A5 B6 A6 Transparency A4 film Envelope* International DL International C5 Special media * Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. These will cause physical damage to the copier. Envelopes with bent corners may frequently misfeed. **For paper weighing from 104 to 130 g/m², A4 is the maximum size that can be fed. · Special papers such as transparency film and labels must be fed one sheet at a time. Be sure to use only genuine SHARP parts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package. Supply list Supply Td cartridge Drum cartridge Part no. 20, 000 sheets 14 *Based on copying onto A4 at 5% toned area. The life of the TD cartridge which has been included in the machine at the factory is approximately 1500 sheets (A4 size paper at 5% toned area). Proper storage 1. Store the supplies in a location that is: · Clean and dry, · At a stable temperature, · Not exposed to direct sunlight. 2. Store copy paper in the wrapper and lying flat. [. . . ] 1 2 3 4 5 6 7 8 9 Signal name STB DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 ACKNLG BUSY PE (Paper End) SLTC AUTO LF (NC) GND (0 V) FG +5V 18 1 36 19 Pin No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Signal name GND (STB RET) GND (DATA1 RET) GND (DATA2 RET) GND (DATA3 RET) GND (DATA4 RET) GND (DATA5 RET) GND (DATA6 RET) GND (DATA7 RET) GND (DATA8 RET) GND (ACKNLG RET) GND (BUSY RET) GND (PE RET) INPRM FAULT (NC) (NC) +5V SLTC IN 14 10 11 12 13 14 15 16 17 18 128 SUK 14 SPECIFICATIONS LEO. p65 128 SPECIFICATIONS 30/03/00, 17:27 Print area The print area of this printer is shown below. Portrait E Landscape E BA E F DC E F D C G G B A Paper size Print area 600 dpi Paper size A Letter Legal Invoice A4 A5 B5 Folio Foolscap 300 dpi Paper size A Letter Legal Invoice A4 A5 B5 Folio Foolscap 2550 2550 1650 2480 1748 2149 2550 2550 B 2456 2456 1552 2384 1648 2056 2456 2456 C 3300 4200 2550 3507 2480 3035 3900 3720 Dots D 3200 4100 2450 3407 2380 2935 3800 3620 E 50 50 50 50 50 50 50 50 F 44 44 48 46 50 43 44 44 G 50 50 50 50 50 50 50 50 Dots B 4904 4904 3104 4760 3296 4104 4904 4904 C 6600 8400 5100 7015 4960 6070 7800 7440 D 6400 8200 4900 6815 4760 5870 7600 7240 E 100 100 100 100 100 100 100 100 96 96 96 100 100 95 96 96 F G 100 100 100 100 100 100 100 100 5100 5100 3300 4960 3496 4299 5100 5100 14 SPECIFICATIONS 129 30/03/00, 17:27 SUK 14 SPECIFICATIONS LEO. p65 129 Transport When moving the machine, follow the procedure below. When moving this machine, be sure to remove the TD cartridge. This prevents toner from spilling inside the machine during shipment. 1 2 3 Turn the power switch off and disconnect the power cord. [. . . ]