User manual SHARP FU-S63E

[. . . ] Please read before operating your new Air Purifier The air purifier draws in room air from its air intake, lets the air pass through a Active Carbon Filter (deodorization filter) and a HEPA Filter (dust collection filter) inside of the unit, then discharges the air from its air outlet. The air purifier unit repeats this process by moving its internal fan. As air passes through, a new HEPA Filter can remove 99. The Active Carbon Filter gradually absorbs odour elements as they repeatedly pass through the filter. [. . . ] ) The concentrated Plasmacluster Ions (ION SHOWER) will be generated in the room like a shower for 15 minutes, repeating the airflow cycles between strong and gentle. (The Plasmacluster Indicator Light repeats its colour cycles between blue and green. When the operation finishes, the unit will return to the prior operation. â· When pushing the ION SHOWER button while the ION SHOWER operation mode is working, the unit will return to the prior operation. When you press the POWER ON/OFF Button, a short beep will sound and operation will start in AUTO Mode. â· Unless unplug the power cord, the operation starts in the previous mode the unit was operated in. The fan speed can be switched among Silent, MEDIUM and MAX settings. 1 hour Cancel 4 hours The unit will stop operation when the timer is up. First 10 minutes since AUTO mode is selected. The unit detects the dust, mold or airborne microbes using its sensors, and controls the generating amount of positive and negative ions automatically. When room air is impure, approximately same numbers of positive and negative ions will be released. When room air is clean, negative ions will be released in an increased rate and controls the ion balance. The same numbers of positive and negative ions are discharged. Clean the MIST Filter when the MIST Filter Indicator Light activates. (The indicator light will be activated in about 1 month, when using the unit with mist operation 24 hours day, every day. When the Plasmacluster ion operation is in Clean Mode, or in AUTO Mode and the air in the room is impure, the Plasmacluster Ions will be released continuously. When the Plasmacluster ion operation is in the AUTO Mode and the air in the room is clean, this light will be activated and the unit will release the negative ions in the increased rate and controls the ion balance. When the Plasmacluster ion operation is in the ION SHOWER Mode, Plasmacluster indicator Light will repeart its colour cycles between blue and green. There are no Plasmacluster ions being generated. â· The light can be turned off by using the `Lights ON/OFF Button' on the Remote Control. In this case, Plasmacluster ions are generated. (Please turn off the light when not required. [. . . ] Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. [. . . ]