User manual SHARP FZ-P63SEF annexe 1

[. . . ] Please have a Sharp Authorized Projector Dealer or Service Center* replace lamp if rupture occurs. · Do not remove the lamp unit directly after operation of the projector. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit. It is recommended that the lamp be replaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality. [. . . ] Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit. It is recommended that the lamp be replaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life (percentage) can be checked with the on-screen display. Insert the new lamp unit. · Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screw. Replace the lamp unit cover. · Align the lamp unit cover and slide it to close (1). Then tighten the user service screw (2) to secure the lamp unit cover. IMPORTANT NOTE TO U. S. CUSTOMERS: The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector Dealer or Service Center*. For the name of the nearest Sharp Authorized Projector Dealer or Service Center*, please call toll-free: 1-888-GO-SHARP (1-888-467-4277). Info · If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Hg LAMP CONTAINS MERCURY For State Lamp Disposal Information www. lamprecycle. org or 1-800-BE-SHARP * Confirm the name of the Dealer or Service Center referring to your projector operation manual. U. S. A. For Lamp 2 · When you reset the timer, press MENU ENTER ENTER MENU Q STANDBY/ON on the projector. · "LAMP2 0000H" is displayed, indicating that the lamp timer is reset. MENU button O/Q buttons ENTER button STANDBY/ON button 2 3 Remove the lamp unit cover. · Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). User service screw (for lamp unit cover) Printed in China 9NK5012072400 11P05-CH-NM DEUTSCH Richten Sie sich bitte nach der beim Projektor mitgelieferten Bedienungsanleitung. Sie können die Bedienungsanleitung auch von der Website (http://sharp-world. com/products/index. html) herunterladen. SVENSKA Anlita bruksanvisningen som medföljer projektorn. Bruksanvisningen kan också nerladdas från vår webbsajt (http://sharp-world. com/products/index. html). FRANÇAIS Reportez-vous au mode d'emploi fourni avec le projecteur. Vous pouvez également télécharger le mode d'emploi sur le site Internet (http://sharp-world. com/products/index. html). PORTUGUÊS Consulte o manual de operação fornecido com o projetor. [. . . ] Bruksanvisningen kan också nerladdas från vår webbsajt (http://sharp-world. com/products/index. html). FRANÇAIS Reportez-vous au mode d'emploi fourni avec le projecteur. Vous pouvez également télécharger le mode d'emploi sur le site Internet (http://sharp-world. com/products/index. html). PORTUGUÊS Consulte o manual de operação fornecido com o projetor. Pode-se também baixar o manual de operação pela internet (http://sharp-world. com/products/index. html). ESPAÑOL Consulte el manual de manejo que se suministra con el proyector. [. . . ]