User manual SHARP GX-27

[. . . ] Introduction Congratulations and thank you for choosing the GX27. About This User Guide This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively. NOTICE • We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. [. . . ] Perform steps 1 to 3 in “Using Images as Wallpaper” on page 92. Press or to highlight the file name you wish to view, then press to select. Once you have viewed the picture, press C [Back] to return to the list. Press or to highlight “Rotate”, then press to select. The picture is rotated 90º anticlockwise. Press A [Rotate] to rotate 90º anticlockwise. Note • The size of pictures that you can rotate is 240 dots [W] × 320 dots [H] or 320 dots [W] × 240 dots [H] maximum. 1. Perform steps 1 to 3 in “Using Images as Wallpaper” on page 92. or to highlight the file name you wish to change, then press A [Options]. Press or to highlight “Rename”, then press or A [Select] to select. 2. Enter a new file name. To correct the last character, press C [Clear] briefly. Press and hold C [Clear] to clear all characters. Press . Gallery 95 Note • Following characters cannot be used for a file name: /, \, :, *, ?, ", <, >, | and . Adjusting the Size of the Picture The pictures that are registered in Picture Gallery can be adjusted for use as main or external displays as well as incoming call, alarm or power on/off displays. When the picture size is modified, the data size is updated. Perform steps 1 to 3 in “Using Images as Wallpaper” on page 92. Press or to highlight the file name you wish to adjust, then press A [Options]. Press or to highlight “Adjust Size”, then press or A [Select] to select. Press or to highlight “Main Display”, “External Display”, “Power On/Off”, “Incoming” or “Alarm”, then press to select. The selected picture is displayed. 5. Press , , or to specify the area you wish to display, then press . to save. To cancel registration, press C [Back] in step 6. [. . . ] (ii) Defects caused by the Product being subjected to any of the following: use in contradiction with the user guide, rough handling, exposure to moisture, dampness or extreme thermal or environmental conditions or rapid changes in such conditions, corrosion, oxidation, unauthorised modifications or connections, unauthorised opening or repair, repair by use of unauthorised spare parts, misuse, improper installation, accident, forces of nature, spillage of food or liquid, influence from chemical products or other acts beyond Sharp's reasonable control (including but not limited to lifetime, and breakage of or damage to antennae) unless the defect was caused directly by defects in materials or workmanship. (iii) Products in respect of which the product serial number or the IMEI number has been removed, erased, defaced, altered or made illegible. 180 Out of Warranty List (iv) Defects caused by the fact that the Product was used with or connected to a products or an accessory not manufactured or supplied by Sharp or was used other than for its intended use. (v) Defects caused by a defective function of the cellular network. (vi) Defects caused by the fact that the battery was short-circuited or seals of the battery enclosure or cells were broken or show evidence of tampering or the battery was used in equipment other than for which it has been specified. [. . . ]