User manual SHARP GX-CD5100W

[. . . ] Thank you for purchasing this SHARP product. To obtain the best PORTABLE CD STEREO COMPONENT SYSTEM MINI-CHAÎNE STÉRÉO PORTATIVE À COMPOSANTES AUDIO SISTEMA INTEGRANTE DE CD PORTÁTIL ESTÉREO MODEL MODÈLE MODELO performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Nous vous remercions d'avoir porté votre choix sur ce produit SHARP. [. . . ] Each time the button is pressed, one track will be cleared, beginning with the last track programmed. You can choose up to 32 selections for playback in the order you like. 1 Whilst in the stop mode, press the MEMORY button to enter the programming save mode. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original programme. To check which tracks are programmed: Whilst the unit is stopped in the programmed play mode, press the or button. 2 Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button. 3 4 Press the MEMORY button to save the track number. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. Press the / ( / ) button to start playback. Notes: When open the CD compartment, the programme is automatically cancelled. Even if you change the function from CD to another, the programmed selections will not be cleared. During programme operation, random play is not possible. 5 6 E-16 04/1/28 CX-GD5100V_EN2. fm CD or MP3 disc Playback Programmed play To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. GX-CD5100W Listening to the radio To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator ENGLISH FM stereo receiving indicator Memorising a station Tuning You can store 40 (FM, SW-1, SW-2 and MW) stations in memory and recall them at the push of a button. (Preset tuning) Radio 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM, SW-1, SW-2 or MW). or ) button to tune in to the desired 1 2 Perform steps 1 - 3 in "Tuning" on page 17. Press the MEMORY button to enter the preset tuning saving mode. 3 Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING button again. Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. [. . . ] record on a metal or CrO tape. ) Cannot erase completely. Are the capstans, pinch rollers, or heads dirty? If a power failure occurs during playback, the heads remain engaged with the tape. Do not open the compartment with great force. Cannot remove the tape. E-28 04/1/28 CX-GD5100V_EN2. fm References GX-CD5100W Troubleshooting chart (continued) If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. [. . . ]