Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP GX-M10. We hope that this SHARP GX-M10 user guide will be useful to you.
Lastmanuals help download the user guide SHARP GX-M10.
Detailed instructions for use are in the User's Guide.
[. . . ] 1 2
Operation with batteries
Fully charge the iPod, iPhone and iPad with AC power before using GX-M10 battery operation. 1 Disconnect the AC and DC power cord, and remove the battery compartment cover. Remove USB connection and undock the iPod or iPhone before installing batteries to avoid possible damage. Connection of the AC or DC power cord to the unit disconnects the batteries. [. . . ] It will continue playback/ pause mode in the 1st track of the selected folder. Display content can be changed by pressing the DISPLAY button. File name display Folder display Counter display Album display Artist display Title display
Microphone or guitar (not supplied)
Headphone (not supplied)
Programmed play (CD)
You can choose up to 32 selections for playback in the order you like. 1 While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. 2 Press the numeric button or or buttons on the remote control to select the desired track. 3 Press the MEMORY button to save the track number. If you want to check the programmed tracks, press the MEMORY button repeatedly. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button for more than 2 seconds. To recall a memorized station
1 Press the PRESET ( or ) button for less than 0. 5 seconds to select the desired station. 3 mm) monaural cable (not supplied) 1 Set the guitar/microphone volume (GAIN) knob to the minimum level. 2 Connect a guitar/microphone to the correct input jack. Make sure that the cable has a 1/4” (6. 3 Arrange the guitar/microphone cables into the grooves of the cable holder on the left or the right side of the unit. Then, thread the cable through the bottom of the unit. Do not let the cables to be on top of the unit when using guitar/microphone as it may cause the unit to roll over causing damage and injury. Audio cable (not supplied) 1 Use a connection cord to connect the portable audio player etc. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the POWER ON/STAND-BY button to turn the power on. 3 Press the AUDIO IN button on the remote control or TUNER/ AUDIO IN button repeatedly on the main unit to select AUDIO IN function. If volume level of the connected device is too high, sound distortion may occur. Should this happen, lower the volume of the connected device. [. . . ] However, if the source is set to USB, make sure there is no iPod or iPhone docked to the unit. This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off. To stop the timer playback, follow step “Cancelling the timer setting” on page 13. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP GX-M10
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP GX-M10 will begin.
