User manual SHARP HT-CN500DVH

[. . . ] Never use the plug without the fuse cover fitted. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. Before replacing the plug cover, make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires. [. . . ] " Be sure your headphones have a 3. 5 mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance. " Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOL buttons. " You cannot use the surround feature with headphones. " Do not plug in/out headphones when recording on other equipment. Sound may skip. 25 HTCN400_500DVE(E)2. fm 92LCN500U0270 03/6/27 HT-CN400DVE HT-CN500DVE DVD playback Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. Playback 1 2 Press the ON/STAND-BY button to turn the power on. When the input is not set to the disc mode, press the FUNCTION button repeatedly to display the startup screen. " The startup screen appears. " Alternatively, press the DVD button on the remote control. NO DISC DVD VideoCD CD Audio Visual Entertainment DVD Operation OPEN/ CLOSE OPEN/ CLOSE ON/ STAND-BY SET UP MUTE 3 4 ON/ STAND-BY TITLE SUBTITLE LANGUAGE DISPLAY Press the OPEN/CLOSE button to open the disc tray. Place the disc on the disc tray, label side up. - DVD playback - MENU/PBC ST/MO ENTER PROG SLEEP Label side SLOW/MEMORY PRESET TUNING LISTENING MODE ADJ/VOL Disc tray Be sure to place 8 cm (3") discs in the middle of the disc position. 1 5 9 2 6 0 3 7 >10 4 8 STEP DIRECT RETURN REPEAT ANGLE ZOOM A-B 5 6 Press the OPEN/CLOSE button to close the disc tray. SHARP 92LCN500U0270 (UK) AUDIO NTSC/PAL Discs supporting auto start will start to play once you close the disc tray even if you do not press the PLAY ( / ) button. If playback does not start in step 5, press the PLAY ( / ) button. 26 HTCN400_500DVE(E)3. fm 92LCN500U0270 03/6/27 HT-CN400DVE HT-CN500DVE To interrupt playback Press the PLAY ( / ) button. To resume playback from the same point, press the PLAY ( / ) button. !To resume playback after stopping (resume play) You can resume playback from the point playback is stopped. To stop playback DVD: Press the STOP ( ) button twice. 1 Whilst a disc is playing, press the button. The system stores the point you stopped. STOP ( ) PRESS PLAY TO CONTINUE DVD VideoCD CD Audio CD/MP3/JPEG: Press the STOP ( ) button. " When search is performed during the DVD playback, pictures may not be forwarded or reversed in the search speed specified in this manual, depending on the disc or the scene being played. " The search does not operate on JPEG discs. Whilst a disc is playing, press the " Use the " Use the or button. button to skip to the next chapter (track). button to skip to the previous chapter (track). SHARP 92LCN500U0270 (UK) " On SVCD, VCD and Audio CD, the button skips to the beginning of the current track. Press the button again to skip to the beginning of the previous track. Notes: " Some discs do not display the chapter (track) and the skip feature is disabled. " On a DVD, skip does not operate between titles. " Alternatively, press the or button on the main unit. 28 HTCN400_500DVE(E)3. fm 92LCN500U0270 03/6/27 HT-CN400DVE HT-CN500DVE !To start playback from the desired point (direct play) To select and play the desired title and chapter: To play by specifying time (time search): You can play back from the desired point by specifying the time. 1 Whilst in the stop or playback mode, press the DIRECT button. TV screen Unit display TITLE TITLE TRK 1 Whilst in the stop or playback mode, press the DIRECT button twice. TITLE 02/12 TIME __:__:__ or button repeatedly. TITLE 01/02 CHAPTER 001/002 c CHP PRESET CHP PROG SLEEP REPEAT 1 A - B O VCD MP3 KHz MHz 2 TITLE 02/12 TIME 01:23:40 To select chapter 1: Press "1". To select chapter 12: Press ">10" and "2". To select chapter 22: Press ">10", ">10" and "2". " To specify 1 hour 23 minutes and 40 seconds, enter "012340". " If you enter the wrong number, start over from step 1. 3 Within 10 seconds, press the ENTER button. Notes: " Some discs cannot play from the specified point. " Time search feature is disabled on some discs. Notes: " Direct play feature is disabled on some discs. [. . . ] It may cause malfunctions. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. " General Power source Power consumption AC 230 V, 50 Hz HT-CN400DVE: Power on: 88 W Power stand-by: 0. 6 W HT-CN500DVE: Power on: 105 W Power stand-by: 0. 6 W Width: 430 mm (16-7/8") Height: 53 mm (2-1/8") Depth: 337 mm (13-1/4") 4. 2 kg (9. 3 lbs. ) Analogue input (IN 1): RCA type ! [. . . ]