User manual SHARP HT-DV40H3

[. . . ] Se reporter aux pages F-1 à F-62. 62 Note: This product is not compatible with MTP and AAC file systems. HT-DV40H3 ENGLISH Special Notes WARNINGS When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. This unit contains no user serviceable parts. [. . . ] Use the button to skip to the next chapter (track). Use the button twice to skip to the previous chapter (track). Notes: Some discs do not display the chapter (track) and the skip feature is disabled. On a DVD, skip does not operate between titles. Notes: On some discs, the search is disabled. On a DVD, search does not operate between titles. On audio CD, the search can be operated between tracks. Whilst searching on a DVD, the sound is not heard and the subtitles only appear at x 2 speed search. When search is performed during the DVD playback, pictures may not be forwarded or reversed in the search speed specified in this manual, depending on the disc or the scene being played. The search does not operate on JPEG discs. Whilst searching on an audio CD, MP3 or WMA disc, the sound can only be heard at x 2 speed search. E-33 HT-DV40H3 ENGLISH To start playback from the desired point (direct play) To select and play the desired title and chapter: To play by specifying time (time search): You can play back from the desired point by specifying the time. 1 1 Whilst in the stop or playback mode, press the DIRECT button. TV screen TT 00/02 CH 000/025 y 01:41:14 Press DIRECT button. For JPEG ZOOM function, please refer page 43 for details. 1 2 Whilst in the stop or playback mode, press the TOP MENU/MENU button to display the disc menu. Press the , , or button to change the setting and press the ENTER button. Note: The procedure shown here provides only general steps. The actual procedure for using the disc menu depends on the disc. See the disc jacket for details. E-36 DVD Operation 2 Press SHIFT and A the end point (B). TV screen B button simultaneously again to enter HT-DV40H3 Useful operation (continued) To play in the desired order (programmed play) WMA ENGLISH 3 You can play back the desired tracks in a specific order. Maximum of 16 tracks can be programmed. Select "PLAY" at the PROGRAM menu by pressing , , or button and press ENTER button on remote control to start play. 1 Whilst in the stop mode, press the MEMORY/DIMMER button. The PROGRAM screen shows as follows on CD and USB: TV screen Unit display PROG To change the programmed contents: Repeat the above procedure from step 1. To cancel the programmed play mode: Select "CLEAR" at the PROGRAM menu by pressing , , or button and press ENTER button on remote control to cancel the programmed play mode. Notes: If the disc is ejected, the programmed sequence will be cancelled. The programme will be automatically cancelled if you press the ON/STAND-BY button to enter the stand-by mode or change the function from DVD/CD to another. During the programme operation, pressing the RANDOM button will automatically cancel the programme. [. . . ] Follow the guidelines below for maximum enjoyment from your CD collection and player. Do not write on either side of the disc, particularly the non-label side from which signals are read. Keep your discs away from direct sunlight, heat, and excessive moisture. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. [. . . ]