User manual SHARP HT-M750H

[. . . ] DEUTSCH Siehe Seiten i bis x und D-1 bis D-68. FRANAIS Se reporter aux pages i x et F-1 F-68. ESPAOL Consulte las pginas i a x y S-1 a S-68. SVENSKA Hnvisa till sidorna i till x och V-1 till V-68. [. . . ] To interrupt playback: Press the STILL button on the remote control. To resume playback from the same point, press the DVD/CD button. To stop playback: DVD: Press the button twice. SVCD/VCD/CD/MP3/WMA/JPEG/DivX : Press the button. E-24 DVD Operation Caution: Do not place two discs in one disc tray. Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunctions. Do not push the disc tray whilst it is moving. If the power fails whilst the tray is open, wait until the power is restored. If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. Subjecting the unit to shock or vibration may cause mistracking. If TV or radio interference occurs during disc operation, move the unit away from it. HT-M750H Playing a disc (continued) Notes: When you turn on the power or switch the input to "DVD" initialisation starts and operation is not possible for a few seconds. Stop positions may be recorded on some discs. When you play such a disc, playback stops there. During an operation, " " may appear indicating that the operation is disabled by the disc. Some DVD may not function as described in the manual. Some CD-R/CD-RW may not play properly due to the status of the disc or equipment used for recording. For more details, see the manual for the equipment. Sound may skip at high volume depending on the disc. Caution: A disc does not play if damaged, dirty or loaded upside down. Make sure to remove the disc before transporting the unit. Otherwise the disc inside may cause malfunction. When attempting to play discs with scratches or of a different region number, or unplayable or restricted (*1) discs, an error message will appear on the TV display and the disc will not play. (*1) Viewing is prohibited on some DVDs according to the audience age. ENGLISH To resume playback after stopping (resume play) You can resume playback from the point playback is stopped. 1 Whilst the disc is playing, press the button. The system stores the point you stopped. Pre-Stop 2 To restart play, press the (DVD/CD ) button. Play Playback resumes from the point you left off. [. . . ] Is the AC power lead of the unit plugged in?Are the batteries inserted? Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the OPEN/CLOSE button, press the ON/ STAND-BY button. The unit turns on and the front panel opens. [. . . ]