User manual SHARP IG-A40E

[. . . ] â· Always hold the plug and never pull on the cord when removing the power plug. Electric shock and/or fire from a short circuit may result. â· DO NOT remove the plug when your hands are wet. â· DO NOT use the unit near gas appliances or fireplaces. [. . . ] In case of fixing the main unit to the floor by anchor bolts. Put the main unit on the anchor bolts and tighten surely with washer and nut. In case of fixing the main unit to the wall with the mounting parts. Fix the mounting parts to the main unit by screws. (Right and left side) The mounting parts and screws are accessory parts. (Each 2 pcs) Screws are to be surely tightened. * Depending on the material of the wall, it may not be able to tighten. Attach the Side Panel and screw the painted screws on both sides. In case that the cover is fixed by a screw, take out the rubber cover and a screw, and open the cover of control panel. As necessary, screw down the cover with the provided screw and the washer and fit in the rubber cover. If the AUTO RESTART switch is set to "ON" and the unit is accidently unplugged, the circuit breaker trips of there is a power failure, the unit will automatically start operation at the previous setting power is restored. WARNING: When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. <For Stubborn Dirt> Use water and a mild detergent. Every 2 weeks or more often if necessary. 720 hours), when operated 24 hours a day. Pull out the filter from bottom of the main unit and remove dust by using a vacuum cleaner or similar tools. * A filter is not disposable item, often clean the filter. When the filter is very dirty, please wash with water or using mild kitchen detergent. Do not rub with a hard sponge and do not bend it when washing. In order to release Plasmacluster Ion stably, periodical replacement of Plasmacluster Ion Generating Unit is necessary. The Plasmacluster Ion Generator may stop working before estimated lifetime. In this case, press Operation Button again and restart. [. . . ] If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products. [. . . ]