User manual SHARP JX-9500

[. . . ] · For information on your operating system, please refer to your operating system manual or the online Help function. · The explanations of screens and procedures in this manual are primarily for Windows® XP in Windows® environments, and Mac OS X v10. 3. 9 in Macintosh environments. The screens may vary depending on the version of the operating system. · Wherever "MX-xxxx" appears in this manual, please substitute your model name for "xxxx". [. . . ] · If you are not installing the PCL printer driver (you are installing the PS printer driver or the PPD driver), select [No] and click the [Next] button. 14 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE Supported operating systems: Windows 98/Me/2000*/XP*/Server 2003* * Administrator's rights are required to install the software. · The PS3 expansion kit is required to use the PS printer driver or the PPD driver. · To install the PPD driver when Windows 98/Me is used, see "USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4. 0)" (page 22) and install the driver using the Add Printer Wizard. · To use the port created when the printer driver is installed for fax data transfer, install the printer driver first and then install the PC-Fax driver. 1 Make sure that a USB cable is not connected to your computer and the machine. If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel] button to close the window and disconnect the cable. 4 5 Double-click the [Setup] icon ( ). The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the license agreement and then click the [Yes] button. You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected. The cable will be connected in step 14. 2 Insert the "Software CD-ROM" into your computer's CD-ROM drive. If you have the 2-disc "Software CD-ROM", insert "Disc 1". 3 Click the [start] button, click [My Computer] ( ), and then double-click the [CD-ROM] icon ( ). In Windows 98/Me/2000, double-click [My Computer] and then double-click the [CD-ROM] icon. 6 Read the message in the "Welcome" window and then click the [Next] button. 15 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 7 Click the [Printer Driver] button. To view information on the software, click the [Display Readme] button. 11 When you are asked if you wish to install the display fonts, select an answer and click the [Next] button. When the SPLC-c printer driver is being installed, this screen does not appear. Go to the next step. 12 Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. When the installation completed screen appears, click the [OK] button. If you are using Windows 2000/XP/Server 2003 If a warning message regarding the Windows logo test or digital signature appears, be sure to click the [Continue Anyway] or [Yes] button. 8 9 Click the [Next] button. Click the [Custom installation] button. 13 Click the [Close] button in the window of step 7. When a message appears prompting you to connect the machine to your computer, click the [OK] button. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. 10 When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button. 16 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 14 Connect the machine to your computer with a USB cable. (1) Make sure that the machine is powered on. (2) Connect the cable to the USB connector (B type) on the machine. The USB interface on the machine complies with the USB 2. 0 (Hi-Speed) standard. · Install the same printer driver on client computers as the printer driver that is installed on the print server. · If the PPD driver is installed on the print server and the client computers are running Windows 98/Me/NT 4. 0, see "USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4. 0)" (page 22) to install the printer driver using the Add Printer Wizard. 1 Insert the "Software CD-ROM" into your computer's CD-ROM drive. If you have the 2-disc "Software CD-ROM", insert "Disc 1" to install the printer driver, or "Disc 2" to install the PC-Fax driver. 6 Click the [Printer Driver] button. · To install the PC-Fax driver, click the [PC-Fax Driver] button. (If you are using the "Software CD-ROM" that accompanies the MX-2300G/MX-2700G, click the [Utility Software] button and then click the [PC-Fax Driver] button. ) · To view information on the software, click the [Display Readme] button. 2 Click the [start] button, click [My Computer] ( ), and then double-click the [CD-ROM] icon ( ). In Windows 98/Me/NT 4. 0/2000, double-click [My Computer] and then double-click the [CD-ROM] icon. 3 4 Double-click the [Setup] icon ( ). The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the license agreement and then click the [Yes] button. Read the message in the "Welcome" window and then click the [Next] button. 5 7 Click the [Next] button. 20 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 8 Click the [Custom installation] button. 11 When the model selection window appears, select the model name of your machine and click the [Next] button. If you are installing the SPLC-c printer driver or the PC-Fax driver, go to step 13. 12 If you are installing the PCL, the PS driver or the PPD driver, select the printer driver to be installed when the printer driver selection window appears and click the [Next] button. Be sure to select the same printer driver as the printer driver installed on the print server. 9 Select [Shared Printer] and click the [Next] button. 10 Select the machine (configured as a shared printer). 13 Follow the on-screen instructions. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. (1) (2) This completes the installation. If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "INSTALLING THE PS DISPLAY FONTS" (page 40). (1) Select the machine (configured as a shared printer) from the list. You can also click the [Add Network Port] button and select the printer to be shared (the machine) by browsing the network in the window that appears. (2) Click the [Next] button. If the shared printer does not appear in the list, check the settings on the print server. 21 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4. 0) If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4. 0 PS printer driver, follow the steps below to install the PPD driver using the Add Printer Wizard. · If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer. · Be sure to view the Readme file (Readme. txt) before installing the PPD driver. The Readme file is in the [English] folder on the "Software CD-ROM". For the location of the folder, see step 4. 1 2 Click the [Start] button, select [Settings] and then click [Printers]. [. . . ] After the installation, a message prompting you to restart your computer will appear. Click the [OK] button and restart your computer. 7 This completes the installation of the software. Next, configure the printer driver settings. 38 MAC OS 9. 0 TO 9. 2. 2 10 Select the PPD file. 13 (1) Select the machine configuration. (2) (1) (3) (2) (1) Select the options that are installed on the machine. (2) Select [Options 2] from the menu to change the screen and continue selecting the options that have been installed on the machine. In the [Options 2] screen, select whether or not a "Right Tray" is installed. (1) Click the PPD file for your model. [. . . ]