User manual SHARP KC-6500E

[. . . ] Please read this manual carefully for the correct usage information. Before using this product, be sure to read the section: "Important Safety Instructions. " After reading this manual, retain it in a convenient location for future reference. When using electrical appliances, basic safety precautions should be followed, including the following: Read all instructions before using the unit. [. . . ] Mode stops running after the long "beep". (Direct start is available even when the unit is not turned on. ) The concentrated Plasmacluster Ions (ION SHOWER) will be generated in the room like a shower for 15 minutes, repeating the airflow cycles between strong and gentle. (The Plasmacluster Indicator Light repeats its colour cycles between light and shade. When the operation finishes, the unit will return to the prior operation. When pushing the ION SHOWER button while the ION SHOWER operation mode is working, the unit will return to the prior operation. The operation mode can be switched, and the Indicator Light will turn on. Use the Clean Air Mode and Humidify Mode together to quickly remove house dust floating in the air as well as eliminates odour. (for fresh air and those of saturated ones. 4 sensors (a *Dust Sensor and an Odour Sensor for detecting impurities in the air, and Temperature/Humidity Sensors for detecting temperature and humidity) are used to automatically control airflow volume in accordance with the state of your room. 2 sensors (a *Dust Sensor and an Odour Sensor for detecting Clean Air : AUTO impurities in the air) are used to automatically control airflow volume in accordance with the amount of impurities detected in Humidify : LOW your room, while humidifying gently and quietly in "Humidify LOW" Mode. 2 sensors (a *Dust Sensor and an Odour Sensor for detecting impurities in the air) are used to automatically control airflow volume in accordance with the amount of impurities detected in your room, humidifying vigorously in "Humidify HIGH" Mode. About Automatic Humidify Mode The Temperature/Humidity Sensors control humidity automatically in accordance with changes in room temperature. on the size dryness of * Dependingin "Humidifyand suchMode. Your room, humidity may not reach 55 - 65%. When operating Clean Air Mode and Humidify Mode together, Humidify Mode takes priority. (when you wish to turn OFF Humidifying) On rainy days, etc. When your room is reasonably humid, turn Humidify Mode OFF. When the device is running, press the Humidify Mode Selection Button to turn Humidify Mode OFF. * HIGH fan speed is an intermediate speed between MEDIUM and MAX. The unit will operate at a fan speed of MAX. The unit will operate at a fan speed of MEDIUM. [. . . ] Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. [. . . ]