User manual SHARP KC-830U

[. . . ] KC-830U AIR PURIFIER with Humidifying Function OPERATION MANUAL Purificateur d’air à fonction d’humidification MANUEL D’UTILISATION PURIFICADOR DE AIRE Con función de humidificación MANUAL DE OPERACIÓN Device of this mark is a trademark of Sharp Corporation. “Plasmacluster” and “Device of a cluster of grapes” are registered trademarks of Sharp Corpration in Japan , USA and elsewhere. Free standing type Type mobile Tipo vertical sin soporte This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by the US EPA. US EPA does not endorse any manufacturer claims of healthier indoor air from the use of this product. [. . . ] 2 Install the filters Place HEPA fi 1 (black)the Truethe mainlter (white) and Deodorizing filter within unit. Do not install the True HEPA filter backwards or the unit will not operate properly. True HEPA filter (white) Deodorizing filter (black) 2 Replace the Back Panel to the main unit. Date Label 3 Fill in the usage start date and place on the unit as guide for when the filters should be replaced. Indd 10 2010/01/07 8:51:58 REFILLING THE WATER TANK The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using in the Humidify Mode, the Water Tank should be filled with water. 2 Remove the Tank Cap and carefully fill the Water Tank with tap water. Change the water in the Water Tank every day with fresh tap water. tank Cap 3 After filling , securely tighten the Tank Cap. € Check to see that there is no water leaking. € Be sure to wipe off any excess water on the outside of the Water Tank. € When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up. 4 Replace the Water Tank in the unit. The top latch will “click” in place when the Water Tank is properly installed. CAUTION • Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result. € Do not use hot water 104 ºF (40 ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur. Use of other water sources may promote the growth of mold, fungus and/or bacteria. Indd 11 2009/12/28 15:05:41 ENGLISH 1 Remove the Water Tank by unlatching the top. OPERATION MAIN UNIT OPERATION Fan Speed Button Plasmacluster Ion ON/OFF Button Fan Speed Indicator Lights Plasmacluster Ion Indicator Light POWER ON/OFF Button To select Clean Air mode, be sure the water tank and humidifying tray are empty. To select Clean Air plus Humidify mode, fill the water tank and install on the unit. Power ON/OFF Button • Press to start operation (short beep) and stop operation (long beep) • Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off. [. . . ] € Sensor operation is affected if the odor sensor openings are dirty or clogged. (See E-13) • Clicking or ticking sounds may be audible when the unit is generating Plasmacluster ions. € Check to see if the filters are heavily soiled. This is normal and is a result of the Plasmacluster Ions refreshing the air. [. . . ]