User manual SHARP LC-15C2E

[. . . ] Thank you for your purchase of the SHARP LCD Colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. [. . . ] See page 15 for details on the use of each item. I The adjustment values and settings which were changed before the screen is restored are saved as is in the memory. For details on using each setting screen, refer to the page number indicated. You can optionally set the standard settings for the following adjustments. You can also easily call up those standard settings or factory-preset settings. Note: I You can also call up the standard settings by pressing YELLOW with the normal screen displayed. [3] Setting Child Lock There are four different ways of activating a child lock: 1. General child lock for all programmes immediately 2. General child lock for all programmes with daily time limit 3. General child lock for all programmes with single time limit 4. Programme-position related child lock without time limit The Child Lock comes into effect only after the LCD TV set has entered the standby mode and is then turned on again. ) Press </> to select the desired choice, and, if required, input digits with Channel Select. Notes: I If the current clock time is within the time limit, the Child Lock is activated immediately after the LCD TV set is turned off and on again. For example, if the current clock time is 9:00 and the time limit is specified from 22:00 to 14:00, the lock is effective from 9:00 to 14:00. I When a Child Lock is set for all programmes with a time limit, the "Time and date" item is not displayed in the TV menu and cannot be selected. Description Select "yes" to activate the Child Lock immediately (after the LCD TV set has been turned off and on again). The lock remains effective until "no" is selected. input the start and end time for a daily-recurring Child Lock. The lock is activated everyday unless "no" is selected. Warning: I The timer takes its clock information from the Teletext broadcast. The teletext broadcast may be different time zone and therefore childlock timer may not activate as expected. [3] Setting Child Lock There are four different ways of activating a child lock: 1. [. . . ] The fluorescent lamp may have reached the end of its service life. Make sure the S-Video terminal has nothing connected. Make sure the volume is not set to minimum. Make sure the sound is not set to mute. [. . . ]