User manual SHARP LC-32/37/42RD2E/RD2S

[. . . ] LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO ESPAÑOL NEDERLANDS ITALIANO FRANÇAIS LC-32RD2E LC-32RD2S LC-37RD2E LC-37RD2S LC-42RD2E LC-42RD2S DEUTSCH ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. [. . . ] NOTE · Adjust while checking the background picture as a reference. · Instead of pressing c/d to adjust the frequency in step 5 above, you can set by directly entering the frequency number of the channel with 0­9. 4 Press a/b to select "Auto Search", "Manual Adjust", "Sort" or "Erase Programme", and then press OK. Auto Search Manual Adjust Sort Erase Programme No Yes EXAMPLE · 179. 25 MHz: Press 1 s 7 s 9 s 2 s 5. · 49. 25 MHz: Press 4 s 9 s 2 s 5 s OK. Colour sys. Select the optimum colour systems to receive. (Broadcasting system) Auto Search You can automatically search for and download TV channels by performing the procedure below. This is the same function as from programme auto search to preset download in Auto Installation. Select the optimum sound systems (Broadcasting systems) to receive. (B/G, D/K, I, L, L') Label When a TV channel sends its Network Name, the Auto Installation detects the information and assigns a name to it. However, you can change individual channel names. 1 2 Repeat steps 1 to 4 in Programme Setup. Press c/d to select "Yes", and then press OK. 1 2 3 4 Programme auto search Auto labelling Auto sorting Preset download 1 2 3 Repeat steps 1 to 4 in Manual Adjust. Press a/b/c/d to select each character of the new name for the channel, and then press OK. Repeat step 2 above until the name is fully spelt out. · The name can be 5 characters or less. · If a channel name is less than 5 characters, select "END", then press OK. Manual Adjust You can set some channel items manually. MENU [Setup . . . Programme Setup] Skip Channels with "Skip" set to "On" are passed over when using Pr/Ps even if selected while watching the image from the TV. Fine Colour sys. Label Skip Decoder Lock [179. 25] [AUTO] [B/G] [SAT. 1] [Off] [Off] [Off] 179. 25 MHz Decoder When connecting a decoder to the unit, you need to select EXT1. NOTE · "Off" is factory preset value. 1 2 3 Repeat steps 1 to 4 in Programme Setup. Press c/d to select "Yes", and then press OK. Press a/b/c/d to select the channel you want to edit, and then press OK. · The selected channel information displays. 16 Menu operations Lock You can block the viewing of any channel. NOTE · See "Child Lock" for setting PIN. · When Lock is set to "On" for a channel, "Child lock has been activated. " displays, and the image and sound of the channel are blocked. · When pressing OK while "Child lock has been activated. " displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off. 4 5 Enter the 4-digit number as a PIN using 0 ­ 9. Enter the same 4-digit number as in step 4 to confirm. · "The system PIN has been changed successfully" displays. NOTE · To view a locked channel, you must enter a PIN. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE · Refer to inside back cover for dimensional drawings. Optional accessories The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop. · Additional optional accessories may be available in near future. [. . . ]