User manual SHARP LC-32/37D65E/DH65E/S

[. . . ] LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO : LC-32D65E/LC-37D65E : LC-32DH65E/LC-37DH65E : LC-32DH65S/LC-37DH65S PORTUGUS ESPAOL NEDERLANDS ITALIANO LC-37D65E LC-37DH65E LC-37DH65S FRANAIS DEUTSCH LC-32D65E LC-32DH65E LC-32DH65S ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] 5 Press c/d to select "On", and then press OK. Selecting Recorder Here, you can select a recorder for the recording from several connected recorders. 1 Repeat steps 1 to 3 in AQUOS LINK Control. 2 Press a/b to select "Selecting Recorder", and then press OK. 3 Select the recorder, and then press OK. NOTE If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS Recorder, the external source's indication changes (e. g. from "HDMI1" to "HDMI1 (Sub)"). Auto Power On If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 1 Repeat steps 1 to 3 in AQUOS LINK Control. 2 Press a/b to select "Auto Power On", and then press OK. 3 Press c/d to select "On", and then press OK. NOTE The factory default for this item is "Off". Using Genre Info. This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. 1 Repeat steps 1 to 3 in AQUOS LINK Control. 2 Press a/b to select "Using Genre Info. ", and then press OK. 3 Press c/d to select "On", and then press OK. 21 AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMIconnected device with a single remote control unit. 1 Open the remote control unit's flip cover. 2 Press PLAY I to start playback of a title. See the right column, section "Playback of titles using AQUOS LINK" if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder. 1 2 Open the remote control unit's flip cover, and then press OPTION. Press a/b to select "Setup Menu", and then press OK. NOTE If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. 3 Press FWD J to fast forward. Press B to turn the HDMI-connected device on/off. Playback of titles using AQUOS LINK This section explains how to play back a title in the AQUOS BD Player/AQUOS Recorder. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Top Menu/Title List", and then press OK. The linked recorder now powers on and the TV automatically selects the appropriate external input source. The title list data from the connected AQUOS BD Player/AQUOS Recorder displays. Listening with the AQUOS AUDIO speaker system You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. AQUOS LINK Menu Recorder EPG Top Menu/Title List Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Setup Menu Model select 3 Select the title with a/b/c/d, and then press PLAY I. Selecting media type for CEC-compatible recorder If your recorder has multiple storage media, select the media type here. [. . . ] In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. [. . . ]