User manual SHARP LC-32/37XL8E/XL8S

[. . . ] LCD COLOUR TELEVISION TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO ESPAOL PORTUGUS NEDERLANDS ITALIANO LCD-FARBFERNSEHGERT FRANAIS LC-37XL8E LC-37XL8S DEUTSCH LC-32XL8E LC-32XL8S ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or )5) and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] NOTE AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS Recorder are scheduled to be on sale after the release of this TV (as of June 2008). What you can do with AQUOS LINK One Touch Recording (DTV only) You do not have to search for the remote control unit of your recording device. Press the REC E or REC STOP H buttons inside the flip cover to start/stop recording what you see on the recorder. One Touch Play When the TV is in standby mode, it will automatically turn on and play back the image from the HDMI source. Single remote control operation The AQUOS LINK automatically recognises the connected HDMI device and you can control the TV and the devices as if using a universal remote control unit. Operating Title list of external devices In addition to displaying the TV's own Timer list (Page 12), you can also call up the external player's Top menu or AQUOS BD Player's/AQUOS Recorder's Title list provided that the devices support AQUOS LINK. Multiple control of HDMI devices You can select which HDMI device to operate using the OPTION button. NOTE When you use AQUOS LINK, make sure to use a certified HDMI cable. Point the remote control unit toward the TV, not to the connected HDMI device. Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable. Up to three HDMI recording devices, one AV amplifier and two players can be connected using this system. These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device and select the appropriate external source using b. When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by selecting "EXT4", "EXT5" or "EXT6" from the "INPUT SOURCE" menu. 20 AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the HDMI CEC protocol. NOTE Refer to the operation manual of the device to be connected for further details. After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices' power have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual output. The cables illustrated in the following explanation are commercially available items. Connecting an AQUOS BD Player/AQUOS Recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD Player/AQUOS Recorder only Optical audio cable HDMI-certified cable HDMI-certified cable HDMI-certified cable AQUOS BD Player/ AQUOS Recorder AQUOS AUDIO speaker system AQUOS BD Player/ AQUOS Recorder AQUOS LINK Setup AQUOS LINK Auto Power On If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 1 Press MENU and the "MENU" screen displays. 2 Press c/d to select "Option". 3 Press a/b to select "AQUOS LINK Setup", and then press OK. 4 Press a/b to select "Auto Power On", and then press OK. 5 Press c/d to select "On", and then press OK. NOTE The factory default for this item is "Off". 1 2 3 Repeat steps 1 to 3 in AQUOS LINK Auto Power On. [. . . ] Please purchase them at your nearest shop. Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. 1 2 Part name Wall mount bracket Attachment Part number AN-37AG2 AN-37P30 39 End of life disposal A. Information on Disposal for Users (private households) 1. [. . . ]