User manual SHARP LC-32BV6E

[. . . ] The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 ENGLISH IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. [. . . ] If not, skip to step 4. 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. · If you already set the Secret No. , input the 4-digit secret number here. See page 43 for setting a secret number. 3 4 Input the 4-digit secret number by using 0­9. 3 4 5 Press a/b to select "Air/Cable", and then press ENTER. Press c/d to select "Air" or "Cable". Press MENU to exit. Press a/b to select the desired language listed on the screen, and then press ENTER. Antenna setting Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". 5 Press c/d to select "Air" or "Cable". Press ENTER to enter the setting. Channel search Channel auto search makes the TV look for all channels viewable in the set area. Channel search Channel auto search makes the TV look for all channels viewable in the set area. 1 2 3 Repeat steps 1 and 2 in Antenna setting in Channel Setup. Press a/b to select "CH Search", and then press ENTER. When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. · The Channel search will start automatically. · To exit the Channel search screen, select "Cancel", and then press ENTER. 6 When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. · The Channel search will start automatically. Press a/b/ c/d to select the position in the category, and then press ENTER to register. Press MENU to exit. 1 2 3 4 Select the channel you want to register as a favorite channel. Press a/b to select "Register", and then press ENTER. Press a/b/c/d to select the position in the category, and then press ENTER to register. A Air B C D Deleting a favorite channel Repeat steps 2 and 3 in Using Favorite CH on the menu screen. Press a/b to select "1 Data Clear", and then press ENTER. · To delete all the favorite channels, select "All Data Clear", and then skip to step 4. 3 1 2 Deleting a favorite channel 1 2 Press FAVORITE and the favorite channel screen displays. Press a/b to select "1 Data Clear", and then press ENTER. · To delete all the favorite channels, select "All Data Clear", and then skip to step 4. 3 4 5 Press a/b/ c/d to select the channel you want to delete, and then press ENTER. Press c/d to select "Yes", and then press ENTER. Press MENU to exit. 3 Press a/b/c/d to select the channel you want to delete, and then press ENTER. A Air B Air C D 3 18 Air 10. 1 4 Press c/d to select "Yes", and then press ENTER. Yes No A Air B C D 3 Air 10. 1 26 Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. OPC setting Automatically adjusts the brightness of the screen. 1 2 3 4 Press MENU to display the MENU screen, and then press c/d to select "Picture". Press a/b to select a specific adjustment item. Press c/d to adjust the item to the desired level. Press MENU to exit. 1 2 3 Press MENU to display the MENU screen, and then press c/d to select "Picture". [. . . ] Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C) 54 Appendix Specifications Item LCD panel Number of dots TV Function TV-standard (CCIR) Receiving Channel VHF/UHF CATV Digital Terrestrial Broadcast (8VSB) Digital cable*1 (64/256 QAM) Audio multiplex Backlight Audio out Terminals Side INPUT 1 INPUT 4 Rear INPUT 2 INPUT 3 INPUT 5 INPUT 6 INPUT 7 DIGITAL AUDIO OUTPUT OUTPUT Model: LC-32BV6E 32 Advanced Super View & BLACK TFT LCD 6, 220, 800 dots (1920 1080 3 dots) Model: LC-37GP1U 37 Advanced Super View & BLACK TFT LCD American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-135ch (non-scrambled channel only) 2-69ch 1-135ch (non-scrambled channel only) BTSC System 60, 000 hours (at Backlight Standard position) 10W 2 AV in, COMPONENT in (Recommend to connect game console) HDMI in with HDCP (Recommend to connect game console) S-VIDEO in, AV in Audio in, COMPONENT in HDMI in with HDCP Audio in, HDMI in with HDCP Audio in, DVI-I in with HDCP Optical Digital audio output Audio out 1 (PCM/Dolby Digital) SUBWOOFER PRE OUT Monaural audio output ANTENNA OSD language Power Requirement Power Consumption Weight Dimension*2 (W H D) TV + stand TV only TV + stand TV only 75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) English/French/Spanish AC 120 V, 60 Hz 165 W (0. 9 W Standby with AC 120V) 44. 1 lbs. /20. 0 kg 36. 4 lbs. /16. 5 kg 31 /64 3125/64 32°F to 25 203 W (0. 9 W Standby with AC 120V) 52. 9 lbs. /24. 0 kg 44. 1 lbs. /20. 0 kg 23 /32 2059/64 9 10 /4 inch 353/64 inch 40°C) 3 363/16 363/16 253/4 235/8 111/2 inch 353/64 inch Operating temperature *1 *2 104°F (0°C to Emergency alert messages via Cable are unreceivable. The dimensional drawings are shown on the inside back cover. · As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ]