User manual SHARP LC-32DH77E

[. . . ] THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. [. . . ] Input the 2-digit channel number to check the signal strength of the selected channel. · Make sure the signal is strong enough for each channel. Signal Strength Channel Strength When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". (Channel selection disabled using CH r/s . ) · Off: Does not skip channels. (Channel selection enabled using CH r/s. ) 7 Press MENU to exit. 1 2 CH Signal Strength NOTE · Make sure what kind of connection is made with your TV. Current 0 Max 0 Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup - DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength 4 Press MENU to exit. NOTE · This function is available for DIGITAL (Air) only. 1 2 Press MENU and the MENU screen displays. Press c/d to select "Setup". 21 Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using Favorite CH on the menu screen Deleting a favorite channel 1 2 3 Repeat steps 1 to 5 in Favorite channel setting. Press a/b to select "1 Data Clear", and then press ENTER. Press a/b/c/d to select the channel you want to delete, and then press ENTER. 1 2 3 4 5 6 Select the channel you want to register as a favorite channel. Press MENU and the MENU screen displays. A Air B 18 Air C D 3 Press c/d to select "Option". Air 10. 1 125 Press c/d to select "Yes", and then press Air Air ENTER. · When a TV program finishes, this function may not operate. Selected item PCM Description The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. Dolby Digital 1 2 3 Repeat steps 1 and 2 in No signal off. Press a/b to select "No Operation Off", and then press ENTER. Press c/d to select "Enable", and then press ENTER. · Five minutes before the power shuts down, the remaining time displays every minute. 5 Press MENU to exit. 4 Press MENU to exit. NOTE · "Disable" is the factory preset value. 26 Using external equipment You can connect many types of external equipment to your TV like a DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. Displaying an external equipment image This explanation is for the setting when connecting a DVD player to the INPUT1 terminal. Selecting the INPUT signal 1 2 3 4 Press MENU and the MENU screen displays. Press c/d to select "Option". Press a/b to select "Input Select", and then press ENTER. Select the desired signal type. For INPUT1 signal Auto COMPONENT VIDEO To watch a DVD image, select "INPUT1" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV. (See page 31. ) (Example) 5 Press MENU to exit. The setting is stored and can be selected on the "INPUT SOURCE" menu. CAUTION · To protect equipment, always turn off the TV before connecting a DVD player, VCR, Digital TV tuner, HDMI equipment, game console, camcorder or other external equipment. · · · · INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 NOTE · If the image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. NOTE See pages 28 to 29 for external equipment connection. Please read the relevant operation manual (DVD player, etc. ) carefully before making connections. Each time INPUT is pressed, the input source toggles. [. . . ] Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to +140°F (f20°C to +60°C) 46 Appendix Specifications Item LCD panel Number of dots TV-standard (CCIR) TV Function Receiving Channel VHF/UHF CATV Model: LC-32DH77E 37o Advanced Super View & BLACK TFT LCD 3, 147, 264 dots (1366 m 768 m 3 dots) American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-135ch (non-scrambled channel only) Digital Terrestrial 2-69ch Broadcast (8VSB) Digital Cable* 1-135ch (non-scrambled channel only) (64/256 QAM) Audio multiplex Backlight Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 ANTENNA DIGITAL AUDIO OUTPUT OUTPUT OSD language Power Requirement Power Consumption Weight Dimension (W m H m D) Accessories Operating temperature w/o stand with stand w/o stand with stand BTSC System 60, 000 hours (at Backlight Standard position) 10W m 2 AV in, COMPONENT in AV in S-VIDEO in, AV in Audio in, HDMI in with HDCP 75 q Unbalance, F Type m 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) Optical Digital audio output m 1 (PCM/Dolby Digital) Audio out English/French/Spanish AC 120 V, 60 Hz 186 W 46. 3 lbs. /21. 5 kg 53. 0 lbs. /24. 0 kg 3625/32 m 2561/64 m 445/64 inch 3625/32 m 285/16 m 129/32 inch Remote control unit (m1), AC cord (m1), "AA" size battery (m2), Cable clamp (m1), Cable tie (m1), Stand unit (m1), Operation manual (m1) e32°F to e104°F (0°C to e40°C) * Emergency alert messages via Cable are unreceivable. · As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]