User manual SHARP LC-32LE630E QUICK START GUIDE

[. . . ] THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. [. . . ] 33 37D90U_en_g. indd 33 2006/02/24 11:34:33 Using external equipment Setting the Input source (i. LINK) If you want to receive an analog signal from the i. LINK device, you need to also use INPUT 1, INPUT 2, INPUT 3, INPUT 4 or INPUT 5 to connect the i. LINK device to the TV and follow the steps below to designate the INPUT you are using. Example: a Digital TV STB connected to the TV using i. LINK terminal and INPUT 2 i. LINK cable (commercially available) AV cable (commercially available) Digital TV STB 1 2 3 4 Press MENU and the MENU screen displays. 5 Press a/b to select the input source. i. LINK Autoswitch Input Select Recording Mode Standby Mode INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 Press c/d to select "Digital Setup". Press a/b to select "i. LINK Setup", and then press ENTER. Press a/b to select "Input Select", and then press ENTER. (Example) 6 Press MENU to exit. 34 37D90U_en_g. indd 34 2006/02/24 11:34:36 Using external equipment Setting the Recording Mode (i. LINK) The function for automatically adjusting the recording mode of connected i. LINK devices can be turned on or off. Since most of the currently available i. LINK devices automatically recognize the transfer rates of the pictures and sound being recorded and control the recording mode accordingly, you should always set this Mode to "Pass through" in normal circumstances. Depending on the i. LINK devices used and the type of broadcast being recorded, this TV may not adjust the recording mode properly. In this case, please set the "Recording Mode" to "Pass through". Setting the Standby Mode (i. LINK) Power consumption during standby mode can be minimized by changing the setting of the "Standby Mode" in "i. LINK Setup". If you are not using i. LINK and want to save power at the standby, select "Inactive" in "Standby Mode". 1 2 3 4 5 Press MENU and the MENU screen displays. Press c/d to select "Digital Setup". Press a/b to select "i. LINK Setup", and then press ENTER. Press a/b to select "Standby Mode", and then press ENTER. Press c/d to select "Active" or "Inactive", and then press ENTER. Description Power continues to pass through the i. LINK circuit so data can be relayed. Follow the procedure for "Deleting registered i. LINK devices" and cancel all i. LINK devices you have registered before reconnecting the i. LINK cable. When an item in the selection screen is grayed out, the item is not recognized by the TV and cannot be selected. (The item may not be connected properly. ) 1 2 Press i. LINK to display the i. LINK control panel. Press a/b/c/d to select "Model", and the press ENTER. STOP 00:01:32 05 PWR STOP Model Input 3 Press b to select a device to be deleted, and then press ENTER. i. LINK Which model do you use?Type Manufacturer Model 1/1 [Thu] 1:33AM Cancel Connection 4 Press c to select "Delete", and the press ENTER. · The selected i. LINK device is deleted from the list. · Select "Cancel" if you do not want to delete any device. 36 37D90U_en_g. indd 36 2006/02/24 11:34:38 Using external equipment Controlling an i. LINK device · The steps in "i. LINK Setup" on pages 34 and 35 need to be completed beforehand. · Please also refer to the operation manual of the i. LINK device to be used with this TV. An i. LINK compatible device can be controlled from the TV using the i. LINK control panel on the screen. Basic operation 1 Press i. LINK to display the i. LINK control panel. · The i. LINK button is also used to exit the i. LINK control panel. 2 Press a/b/c/d to select a function, and then press ENTER. i. LINK control panel (D-VHS decks) Cassette inserted Current operation STOP 00:01:32 Manufacturer Model Type of i. LINK device 05 PWR STOP Model Input Go to Model Selection screen Select input Tape Counter Function selected with the cursor Type of videotape PWR Power On/Off STOP PLAY PAUSE REC START SKIP BACK REWIND FAST FORWARD SKIP FORWARD i. LINK control panel (AV-HDD recorder/Blu-ray Disc recorder) Disk inserted Manufacturer Model Current operation Type of i. LINK device Current counter position/Time* STOP 00:01:10 / 00:01:12 Free 61% STOP 06 PWR REC LIST REC Oper. Model l30sec k30sec Input Go to REC operation screen Go to Model Selection screen Select input Repeat status Function selected with the cursor Remaining space PWR Power On/Off STOP PLAY PAUSE GO TO REC LIST SKIP BACK REWIND FAST FORWARD SKIP FORWARD REPEAT PLAYBACK EJECT l30sec k30sec REC LIST 30 SEC SKIP BACK 30 SEC SKIP FORWARD NOTE · The "Input" button is used to select either i. LINK or other input. · The EJECT button is displayed for Blu-ray Disc recorder only. [. . . ] · If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. 72 · As long as that from which the parameter (g) in the table is a numerical value, it may write anything. 37D90U_en_k. indd 72 2006/02/24 11:39:35 Appendix Specifications Item LCD panel Number of dots TV-standard TV Function Receiving Channel VHF/UHF CATV Model: LC-32LE630E 37o Advanced Super View & BLACK TFT LCD 6, 220, 800 dots (1920 m 1080 m 3 dots) American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-125ch* (non-scrambled channel only) Digital Terrestrial 2-69ch Broadcast (8VSB) Digital cable 1-135ch (64/256 QAM) Audio multiplex Backlight Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 Air ANTENNA Cable ANTENNA I. LINK DIGITAL AUDIO OUTPUT OUTPUT OSD language Power Requirement Power Consumption Weight Dimension (W m H m D) Accessories Operating temperature w/o stand with stand w/o stand with stand BTSC System 60, 000 hours (at Backlight Standard position) 10W m 2 AV in, COMPONENT in AV in, S-VIDEO in HDMI in with HDCP Audio in, HDMI in with HDCP Audio in, DVI-I in with HDCP 75 q Unbalance, F Type for VHF/UHF/Digital Air in m 1 75 q Unbalance, F Type for CATV/Digital Cable in m 1 IEEE1394 m 2 with DTCP Optical Digital audio output m 1 (PCM/Dolby Digital) Audio out English/French/Spanish AC 120 V, 60 Hz 230 W 50. 7 lbs. /23. 0 kg 62. 9 lbs. /28. 5 kg 365/8 m 269/64 m 413/16 inch 365/8 m 2845/64 m 121/16 inch Remote control unit (m1), AC cord (m1), "AAA" size battery (m2), Cable clamp (m1), Cable tie (m1), Operation manual (m1) e32°F to e104°F (0°C to e40°C) * Emergency alert messages via Cable are unreceivable. · As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]