User manual SHARP LC-32LE700S QUICK GUIDE

[. . . ] LC-32LE700E LC-32LE700S LC-40LE700E LC-40LE700S LC-46LE700E LC-46LE700S LC-52LE700E LC-52LE700S LC-32LX700E LC-40LX700E LC-46LX700E LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO PORTUGUS ESPAOL NEDERLANDS ITALIANO FRANAIS DEUTSCH ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] The title list data from the connected AQUOS BD player/ AQUOS recorder displays. E Displaying "AQUOS LINK menu" Open the remote control unit's flip cover, and then press <. 2 Select the title with a/b/c/d, and then press PLAY I. By AQUOS AUDIO SP You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. Media change If your recorder has multiple storage media, select the media type here. Press a/b to select "By AQUOS AUDIO SP", and then press ;. The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. 1 2 Press a/b to select "Media change", and then press ;. Select the desired medium, such as DVD recorder or HDD. The media type changes every time you press ;. By AQUOS SP You can choose to listen to the TV sound only from the AQUOS TV speaker system. Model select If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. Press a/b to select "By AQUOS SP", and then press ;. Sound mode change You can manually change the AQUOS AUDIO speaker system's sound mode. Press a/b to select "Model select", and then press ;. The HDMI device changes every time you press ;. Recorder EPG You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. 1 2 Press a/b to select "Sound mode change". The sound mode changes every time you press ;. Refer to the operation manual of the AQUOS AUDIO speaker system for details. 1 Press a/b to select "Recorder EPG", and then press ;. The external input source switches and the recorder's EPG is displayed. 2 Select the programme to record. Refer to the operation manual of the recorder for details. 21 Menu operation What is the MENU? You need to call up the OSD to perform settings for the TV. The OSD for the settings is called "MENU". The "MENU" enables various settings and adjustments. Basic operation Display the MENU screen Press @ and the "MENU" screen displays. LCFONT embedded Picture Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press ;. Press 6 to return to the previous "MENU" page. Selecting in the MENU DYNAMIC OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset [Off] ECO picture control Energy save No signal off No operation off Sleep timer [On] [Off] [Disable] [Disable] Selecting options Exit the MENU screen The operation will exit the "MENU" screen if you press > before it is completed. Yes No LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. NOTE "MENU" options differ in the selected input modes, but the operating procedures are the same. Items with 4 cannot be selected for various reasons. The "MENU" screen will disappear if left unattended for several seconds. Operation without a remote control unit This function is useful when there is no remote control unit within your reach. 1 2 3 Press @ and the "MENU" screen displays. Press :r/s instead of a/b or i+/- instead of c/d to select the item. Press b to complete the setting. About the guide display The guide display at the bottom of the screen shows operations with the OSD. The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen. Select Enter Back End 22 Basic adjustment Picture settings Picture Picture Advanced [Off] DYNAMIC OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset This TV provides various advanced functions for optimising the picture quality. C. M. S. -hue C. M. S. -saturation C. M. S. -value Colour temp. 100 Hz Film mode Active contrast Gamma adjustment DNR 3D-Y/C Monochrome Range of OPC R Y G C B M Picture OPC Automatically adjusts the brightness of the screen. Item On:Display On Off Displays the OPC effect on the screen while adjusting the brightness of the screen. The brightness is fixed at the value set in "Backlight". C. M. S. -hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C. M. S. -saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system. NOTE When set to "On", the TV senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. C. M. S. -value This function adjusts the brightness of a selected colour using a six-colour adjustment system. Picture Colour temp. Adjusts the colour temperature to give the best white image. Item High Mid-High c (Cursor) d (Cursor) Middle The screen brightens For more contrast For more brightness For more colour intensity Skin tones become greenish For more sharpness Mid-Low Low R/G/B Gain (LO), R/G/B Gain (HI) White with bluish tone. Intermediate tone between "High" and "Middle". Intermediate tone between "Middle" and "Low". Adjusts the white balance by changing the value of each item. Picture adjustments Adjusts the picture to your preference with the following picture settings. Adjustment items Selectable items Backlight Contrast Brightness Colour Tint Sharpness The screen dims For less contrast For less brightness For less colour intensity Skin tones become purplish For less sharpness 23 Basic adjustment 100 Hz "100 Hz" technology provides superior solutions for digital display picture quality removing motion blur. Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE This effect is greater on fast moving images. [. . . ] In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. [. . . ]