User manual SHARP LC-32LU632E QUICK START GUIDE

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENGLISH IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. [. . . ] Increases or decreases the saturation of a selected color. A higher value makes the image brighter. A lower value makes the image darker. Selected item C. M. S-Hue C. M. S-Saturation C. M. S-Value NOTE · For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER. 23 Basic adjustment settings 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. 1 Press MENU and the MENU screen displays. 2 3 4 5 1 Press c/d to select "Picture". Repeat steps 1 to 3 in 3D-Y/C. Press a/b to select "Film Mode", and then press ENTER. Press c/d to select "On", and then press ENTER. Description Normal viewing mode Detects, analyzes, converts film source 2 Press a/b to select "Advanced", and then press ENTER. 3 Press a/b to select "3D-Y/C", and then press ENTER. Press a/b to select the desired level, and then press ENTER. Description Normal adjustment For movie image For still image Selected item Off On Selected item Standard Fast Slow I/P Setting Converts input signals from interlace to progressive. NOTE · 3D-Y/C is not available for S-video, Component, DVI or HDMI inputs. 1 2 3 NOTE Repeat steps 1 to 3 in 3D-Y/C. Press a/b to select "I/P Setting", and then press ENTER. Press c/d to select "Fast" or "Slow", and then press ENTER. Monochrome For viewing a video in monochrome. 1 2 3 Repeat steps 1 to 3 in 3D-Y/C. · "I/P Setting" is not selectable when channel display shows an input resolution of 480P, 720P or 1080I. Press a/b to select "Monochrome", and then press ENTER. Press c/d to select "On", and then press ENTER. Description Normal color For viewing in monochrome Selected item Off On 24 Basic adjustment settings Sound adjustment You can adjust the sound quality to your preference with the following settings. Dolby virtual You can enjoy the SURROUND 2ch stereo with Dolby Pro Logic II technology. VIRTUAL DOLBY SURROUND is a technology certified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using Dolby Pro Logic or Dolby Pro Logic II. Input Select] INPUT button Auto COMPONENT To watch a DVD image, select "INPUT1" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV. (See page 35. ) Video INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 NOTE · If the image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. The setting is stored and can be selected on the "INPUT SOURCE" menu. CAUTION · To protect all equipment, always turn off the TV before connecting to a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console, camcorder or other external equipment. NOTE · See pages 28 to 32 for external equipment connection. · Please refer to the relevant operation manual (DVD player, PC, etc. ) carefully before making connections. · Each time INPUT is pressed, the input source toggles. · Refer to your external equipment operation manual for the signal type. 27 Using external equipment Connecting a DVD player You can use the INPUT 1 to INPUT 5 terminals when connecting to a DVD player and other audiovisual equipment. (INPUT 1 or 2) Audio cable (commercially available) Component video cable (commercially available) When using composite cable. (INPUT 1, 2 or 3) DVD player AV cable (commercially available) DVD player When using DVI cable. (INPUT 5) ø 3. 5 mm stereo minijack cable (commercially available) DVI cable (commercially available) DVD player NOTE · See page 31 for connecting a DVD player to HDMI terminal. 28 Using external equipment Connecting a VCR, game console or camcorder A VCR, game console, camcorder and some other audiovisual equipment are conveniently connected using the INPUT 1 to 3 terminals. NOTE · The S-video terminal has priority over the video terminals. (INPUT 3 only) AV cable (commercially available) S-video cable (commercially available) VCR/Game console/ Camcorder 29 Using external equipment Connecting a Digital TV STB You can use the INPUT 1 to INPUT 5 terminals when connecting a Digital TV STB and other audiovisual equipment. (INPUT 1 or 2) Audio cable (commercially available) Component video cable (commercially available) Digital TV STB When using composite cable. (INPUT 1, 2 or 3) AV cable (commercially available) Digital TV STB When using DVI cable. [. . . ] YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific Section Your Product Model Number & Description: LC-26GA5U LCD Color Television LC-32LU632E LCD Color Television (Be sure to have this information available when you need service for your Product. ) One (1) year parts and labor from the date of purchase. From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. [. . . ]