User manual SHARP LC-32ST1EA

[. . . ] LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO ESPAÑOL NEDERLANDS ITALIANO FRANÇAIS DEUTSCH LC-32SD1EA LC-32ST1EA ENGLISH SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should and of the same rating the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. [. . . ] · When pressing OK while "Child lock has been activated. " displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off. 4 5 6 7 8 Press a/b to select "Manual Adjust" and then press OK. Press c/d to select "Yes", and then press OK. Press a/b/c/d to select the channel you want to edit, and then press OK. · The selected channel information displays. Press a/b to select the desired menu item, and then press OK. Press a/b/c/d to select or adjust. NOTE · When you exit Programme Setup "Manual Adjust" menu, preset download automatically runs if you change information on that menu. Sort Channel positions can be sorted freely. Fine You can adjust the frequency to your desired position. NOTE · Adjust while checking the background picture as a reference. · Instead of pressing c/d to adjust the frequency in step 8 above, you can set by directly entering the frequency number of the channel with 0­9. 1 2 3 4 5 Repeat steps 1 to 4 in Programme Setup. Press c/d to select "Yes", and then press OK. Press a/b/c/d to select the channel you want to move, and then press OK. Press a/b/c/d to move it to the desired position, and then press OK. Repeat steps 3 and 4 until all desired channels are sorted. EXAMPLE · 179. 25 MHz: Press 1 s 7 s 9 s 2 s 5. · 49. 25 MHz: Press 4 s 9 s 2 s 5 s OK. Erase Programme An individual programme can be erased. Colour sys. Select the optimum colour systems to receive. (Broadcasting system) Select the optimum sound systems (Broadcasting systems) to receive. (B/G, D/K, I, L, L') Label When a TV channel sends its Network Name, the Auto Installation detects the information and assigns a name to it. However, you can change individual channel names. 1 2 3 4 5 Repeat steps 1 to 4 in Programme Setup. Press c/d to select "Yes", and then press OK. Press a/b/c/d to select the channel you want to erase, and then press OK. · A message screen pops up. Press c/d to select "Yes", and then press OK to erase the selected programme. Repeat steps 3 and 4 until all desired channels are erased. 1 16 Repeat steps 1 to 7 in Manual Adjust. Menu operations Child Lock TV only Input Label You can assign each input source a label you like. Allow you to use a PIN to protect certain settings from being accidentally changed. Changing the PIN 1 2 3 Press MENU and the MENU screen displays. Press a/b to select "Child Lock", and then press OK. Change PIN Reset 1 2 3 4 5 6 Press b to select the desired input source. Press MENU and the MENU screen displays. Press a/b to select "Input Label", and then press OK. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE · Refer to inside back cover for dimensional drawings. Optional accessories The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop. · Additional optional accessories may be available in near future. [. . . ]