User manual SHARP LC-40LX810E

[. . . ] LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO LCD RENKL TELEVZYON OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO KULLANMA KILAVUZU TRKE PORTUGUS ESPAOL LC-40LE820E LC-40LE820ERU LC-40LU820E LC-46LE820E LC-46LE820ERU LC-46LU820E LC-52LE820E LC-52LE820ERU NEDERLANDS LC-40LE810E LC-40LE810ERU LC-40LX810E LC-46LE810E LC-46LE810ERU LC-46LX810E ITALIANO FRANAIS DEUTSCH ENGLISH The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] For a clear-cut image emphasising high contrast for sports viewing. For a clear-cut image emphasising high contrast for sports viewing (the "Picture" and "Audio" settings cannot be adjusted). Picture adjustments Adjusts the picture to your preference with the following picture settings. Adjustment items Selectable items Backlight Contrast Brightness Colour Tint Sharpness c (Cursor) The screen dims For less contrast For less brightness For less colour intensity Skin tones become purplish For less sharpness d (Cursor) The screen brightens For more contrast For more brightness For more colour intensity Skin tones become greenish For more sharpness AUTO STANDARD MOVIE GAME PC* USER x. v. Colour** DYNAMIC DYNAMIC (Fixed) 26 Basic adjustment Picture Film mode Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality ("Advanced (High)", "Advanced (Low)", "Standard", "Off"). Advanced This TV provides various advanced functions for optimising the picture quality. Go to "Menu" > "Setup" > "Picture" > "Advanced". Active contrast Automatically adjusts the contrast of an image according to the scene. C. M. S. -hue This function adjusts the hue of a selected colour using a six-colour adjustment system. DNR "DNR" produces a clearer image ("Auto", "High", "Middle", "Low", "Off"). C. M. S. -saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system. NOTE This function may not be available depending on the input signal type. C. M. S. -value This function adjusts the brightness of a selected colour using a six-colour adjustment system. 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise by detecting changes in the image. Item Standard Fast Slow Normal adjustment. Sets the optimum image quality for fastmoving images. Sets the optimum image quality for slow-moving images. Colour temp. Adjusts the colour temperature to give the best white image. Item High Mid-High Middle Mid-Low Low R/G/B Gain (LO), R/G/B Gain (HI) White with bluish tone. Intermediate tone between "High" and "Middle". Intermediate tone between "Middle" and "Low". Adjusts the white balance by changing the value of each item. NOTE "3D-Y/C" may not operate depending on the input signal type or when the input signal is noisy. "3D-Y/C" has even more effect on composite video signals (CVBS). Monochrome For viewing a video in black & white. Fine motion advanced "Fine motion advanced" technology provides superior solutions for digital display picture quality removing motion blur ("High", "Low", "Off"). Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE This effect is greater on fast moving images. "Fine motion advanced" will have no effect in the following cases. 1) The type of signal received is a PC signal. If images appear blurred, set the "Fine motion advanced" to "Off". NOTE This function is available only when the "OPC" setting is set to "On" or "On:Display". The maximum setting cannot be set to a smaller number than the minimum setting. The minimum setting cannot be set to a bigger number than the maximum setting. The maximum and minimum settings cannot be set to the same number. Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Gamma adjustment Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e 2 to a minimum of f 2. 27 Basic adjustment Audio settings Go to "Menu" > "Setup" > "Audio". Menu CH list :Enter :Back Audio Bass enhancer This function allows you to enjoy bass-enhanced sound. Setup Audio Clear voice Audio STANDARD Auto volume [Off] This function emphasises speech against background noise for greater clarity. Treble Bass Balance L30 R30 Setting audio input Option Audio select When using the EXT 3 terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input. Audio Auto volume Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. This function reduces this problem by equalizing levels. Item High Middle Low Off Slightly reduces the volume gaps among different sound sources. Strongly reduces the volume gaps among different sound sources. Go to "Menu" > "Setup" > "Option" > "Terminal setting" > "PC input" > "Audio select". When selecting "HDMI 2" from the "INPUT" menu Item HDMI (Digital) When connecting devices (including a PC) with HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (R/L) jack. HDMI+Analog NOTE You must set this to "HDMI+Analog" when connecting devices (including a PC) with an HDMI-certified cable to the HDMI 2 terminal. If "HDMI (Digital)" is set, there will be no sound output. Audio Audio adjustment You can adjust the sound quality to your preference with the following settings. Selectable items Treble Bass Balance c (Cursor) For weaker treble For weaker bass Decrease audio from the right speaker d (Cursor) For stronger treble For stronger bass Decrease audio from the left speaker When selecting "EXT 3" from the "INPUT" menu Item Video When connecting devices with AV cable to the EXT 3 terminal, display images without audio. When connecting a PC to the EXT 3 terminal, and inputting analogue audio signals from the AUDIO (R/L) jack. Video+audio NOTE You must also set "COMPONENT" from the "Input select" menu when selecting "EXT 3" from the "INPUT" menu (Pages 15 and 40). Audio Surround This function allows you to enjoy realistic live sound. 28 Basic adjustment Power save settings Go to "Menu" > "Setup" > "ECO". Menu CH list :Enter :Back E "Energy save" status icons Icon Description "Energy save" is set to "Standard". "Energy save" is set to "Advanced". Setup ECO ECO picture control [On] When "Energy save" is set to "Standard" or "Advanced", "Energy save" status icons appear in the "Picture" menu and channel information windows. ECO Energy save [Off] No signal off When set to "Enable", the TV will automatically enter standby mode if there is no signal input for 15 minutes. No signal off [Disable] No operation off [Disable] NOTE Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals. ECO ECO ECO picture control This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged. No operation off The TV will automatically enter standby mode if no operations are performed in three hours if "Enable" is selected. NOTE This function does not work when "AV mode" is set to "DYNAMIC (Fixed)" or "AUTO". [. . . ] J Standby power consumption applies when the TV is set to not receive EPG data. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 54 Appendix Environmental specifications Item I On-Mode (W) (HOME MODE) Advanced 40 inch models 71 W 69 W 0. 20 W MAIN POWER switch 0. 01 W or less 103. 7 kWh Advanced 100. 7 kWh 46 inch models 85 W 77 W 0. 20 W 0. 01 W or less 124. 1 kWh 112. 4 kWh 52 inch models 96 W 86 W 0. 20 W 0. 01 W or less 140. 2 kWh 125. 6 kWh J Energy-Save-Mode (W) K Standby-Mode (W) L Off Mode (W) M Annual Energy Consumption (kWh) Annual Energy Consumptioning N Energy-Save-Mode (kWh) I J K L M N Measured according to IEC 62087 Ed. [. . . ]