User manual SHARP LC-40SH340K

[. . . ] Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dear SHARP customer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] First, language selection screen will be displayed: To select the "Yes" or "No" option, highlight the item by using " " or " " buttons and press OK button. Afterwards, the following OSD will be displayed on the screen and the digital television will search for digital terrestrial TV broadcasts. Note: You can press "MENU" button to cancel. · Use " " or " " buttons to select your language and press OK button to set selected language and continue. · After selecting the language, "Welcome!" screen will be displayed, requiring you to set Country, Teletext Language and Scan Encrypted options. If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the "Choose Region" OSD will be displayed after the digital channels have been scanned. To prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST!select your preferred regional options for each level where available, move the cursor to each option and press the Left/right arrow keys to view the available regions/transmitters. The example below shows "UK" "England" "North West" have been selected as the regional options, after OK is pressed they can only be changed if "First time installation" is repeated. Received regional variations from the non selected region/transmitters will be stored from preset 800. · By pressing " " or " " button, select the country you want to set and press " " button to highlight Teletext Language option. Use " " or " " button to select desired Teletext Language. English - 16 00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10072502_50185682. indd 16 02. 09. 2011 15:57:16 Installation Press "MENU" button on the remote control and select Installation by using " " or " " button. Press OK button and the following menu screen will be displayed. After all the available stations have been stored a channel list will be shown based on the broadcaster LCN press OK to accept this channel order and start viewing or use the Edit functions to change the order or delete unwanted channels. Select Automatic Channel Scan (Retune) by using " "/" " button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select Digital Aerial, Analogue or Digital AerialAnalogue tuning using " "/" " and OK buttons. Automatic Channel Scan (Retune) Menu Operation Digital: Searches and stores aerial DVB stations. Analogue: Searches and stores analogue stations. Full: Searches and stores both analogue and aerial DVB stations. · Press OK button to quit channel list and watch TV. · Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using . " " or " " and OK button. · After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. [. . . ] Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu. · In Upgrade Options menu select Scan for upgrade and press OK button. · If a new upgrade is found, it starts to download the upgrade. [. . . ]