User manual SHARP LC-52DH77E

[. . . ] TELEWIZOR KOLOROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVKOU TELEVÍZOR S FAREBNOU LCD OBRAZOVKOU VÄRVILINE LCD-TELER SIDRO KRISTLU EKRNA (LCD) KRSU TELEVIZORS SPALVINIS LCD TELEVIZORIUS LCD ( ) LCD RENKL TELEVZYON LCD COLOUR TELEVISION ENGLISH TÜRKÇE LIETUVISKA INSTRUKCJA OBSLUGI KEZELÉSI ÚTMUTATÓ NÁVOD K OBSLUZE NÁVOD NA OBSLUHU KASUTUSJUHEND LIETOSANAS ROKASGRMATA NAUDOJIMO INSTRUKCIJA KULLANMA KILAVUZU OPERATION MANUAL LATVISKI EESTI SLOVENSKY CESKY LC-32DH77E LC-42DH77E LC-46DH77E LC-52DH77E LC-32DH77V LC-42DH77V LC-46DH77V LC-52DH77V MAGYAR POLSKI SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. [. . . ] While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 1 Repeat steps 1 to 3 in AQUOS LINK Control. 2 Press a/b to select "Auto Power On", and then press OK. 3 Press c/d to select "On", and then press OK. NOTE · The factory default for this item is "Off". Using Genre Info. This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. 1 Repeat steps 1 to 3 in AQUOS LINK Control. 2 Press a/b to select "Using Genre Info. ", and then press OK. 3 Press c/d to select "On", and then press OK. 20 AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMIconnected device with a single remote control unit. 1 Open the remote control unit's flip cover. 2 Press PLAY I to start playback of a title. · See the right column, section "Playback of titles using AQUOS LINK" if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder. 1 2 Open the remote control unit's flip cover, and then press OPTION. Press a/b to select "Setup Menu", and then press OK. NOTE · If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. 3 Press FWD J to fast forward. Press B to turn the HDMI-connected device on/off. Playback of titles using AQUOS LINK This section explains how to play back a title in the AQUOS BD Player/AQUOS Recorder. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Top Menu/Title List", and then press OK. · The linked recorder now powers on and the TV automatically selects the appropriate external input source. · The title list data from the connected AQUOS BD Player/AQUOS Recorder displays. Listening with the AQUOS AUDIO speaker system You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. AQUOS LINK Menu Recorder EPG Top Menu/Title List Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Setup Menu Model select 3 Select the title with a/b/c/d, and then press PLAY I. Selecting media type for CEC-compatible recorder If your recorder has multiple storage media, select the media type here. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Media change", and then press OK. 3 Select the desired medium, such as DVD recorder or HDD. The media type changes every time you press OK. 2 Press a/b to select "By AQUOS AUDIO SP", and then press OK. · The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. Listening with the AQUOS TV speaker system You can choose to listen to the TV sound only from the AQUOS TV speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "By AQUOS SP", and then press OK. HDMI device selection If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. [. . . ] Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. [. . . ]