User manual SHARP LC-52HD1E

[. . . ] The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 ENGLISH IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. [. . . ] Page 31 Input Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 33 Position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32 Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32 Blue Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32 Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32 Option Option Audio Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36 Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36 Input Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30 Output Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36 Color System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. The Channel search will start automatically. To exit the Channel search screen, select "Cancel", and then press ENTER. 7 Press MENU to exit. 4 NOTE If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. Press MENU to exit. NOTE If no channel is found, confirm the type of connection made with your TV and try channel search again. If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. 23 Basic adjustment settings Channel memory setting 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. If you already set the Secret No. , input the 4-digit secret number here. See page 40 for setting a secret number. 3 Press a/b to select "Signal Strength". The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength Signal Strength Current 0 Max 0 3 4 5 Press a/b to select "CH Memory", and then press ENTER. Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. 4 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 2 3 Repeat steps 1 and 2 in Signal Strength in Antenna Setup - DIGITAL. Press a/b to select "Channel Strength", and then press ENTER. [. . . ] Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4F to e140F (f20C to e60C) 51 Appendix Specifications Item LCD panel Number of dots TV-standard (CCIR) TV Function Receiving Channel Model: LC-46D82U 46o Advanced Super View & BLACK TFT LCD 6, 220, 800 dots (1920 g 1080 g 3 dots) American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch VHF/UHF CATV 1-135ch (non-scrambled channel only) Digital Terrestrial 2-69ch Broadcast (8VSB) Digital cable*1 1-135ch (non-scrambled channel only) (64/256 QAM) Audio multiplex Backlight Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 ANTENNA DIGITAL AUDIO OUTPUT OUTPUT OSD language Power Requirement Power Consumption Weight Dimension*2 (W g H g D) TV e stand TV only TV e stand TV only BTSC System 60, 000 hours (at Backlight Standard position) 15W g 2 AV in, COMPONENT in AV in, COMPONENT in S-VIDEO in, AV in HDMI in with HDCP HDMI in with HDCP Audio in, HDMI in with HDCP 75 q Unbalance, F Type g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) Optical Digital audio output g 1 (PCM/Dolby Digital) Audio out English/French/Spanish AC 120 V, 60 Hz (FOR NORTH AMERICA) AC 110-240 V, 50/60 Hz (FOR OTHERS) 285 W (0. 7 W Standby with AC 120V) 78. 3 lbs. /35. 5 kg 68. 3 lbs. /31. 0 kg 4449/64 g 3111/32 g 1211/64 inch 44 /64 g 28 /8 g 4 /64 inch 49 7 57 Model: LC-52HD1E 52o Advanced Super View & BLACK TFT LCD 322 W (0. 7 W Standby with AC 120V) 92. 6 lbs. /42. 0 kg 82. 7 lbs. /37. 5 kg 501/8 g 3429/64 g 1211/64 inch 501/8 g 3163/64 g 431/32 inch Operating temperature 1 e32F to e104F (0C to e40C) * Emergency alert messages via Cable are unreceivable. *2 The dimensional drawings are shown on the inside back cover. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ]