User manual SHARP LC-52LE8

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: SPECIAL NOTE FOR USERS IN THE U. K. The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 2 Using genre info This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. NOTE The factory default for this item is "Off". Selecting recorder Here, you can select a recorder for the recording from several connected recorders. Audio return channel (ARC) If this function is set to "Auto", the TV can send audio data for video content shown on the TV to a connected audio device with just one ARC-compatible cable. Using this function eliminates the need to use a separate digital or analogue audio cable. NOTE If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source's indication changes (e. g. , from "HDMI 1" to "HDMI 1 (Sub)"). Connection for using "Audio return channel" You need to use ARC-compatible cables/devices and connect to the HDMI 1 terminal to activate this function. The connection method is the same as the above Connecting an AQUOS BD player/AQUOS recorder only. AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Setup menu You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc. ) using the "Setup menu" function. Press a/b to select "Setup menu", and then press ;. NOTE 1 2 Press I to start playback of a title. See the section Top menu/title list if you want to start playback using the list of the titles in the AQUOS BD player/AQUOS recorder. If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. Press J to fast forward. Press SOURCE B to turn the HDMIconnected device on/off. Media change If your recorder has multiple storage media, select the media type here. 1 2 Press a/b to select "Media change", and then press ;. Select the desired medium, such as DVD recorder or HDD. The media type changes every time you press ;. AQUOS LINK menu You can arrange the settings for the sound or external device by pressing < on the remote control unit to display the AQUOS LINK menu screen. Change audio output device By AQUOS audio SP You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. NOTE You can also select the AQUOS LINK menu from the "Link operation" menu. Recorder power on/off You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. Press a/b to select "By AQUOS audio SP", and then press ;. The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. 1 Press a/b to select "Recorder on/off", and then press ;. The external input source switches and the recorder's EPG is displayed. By AQUOS SP You can choose to listen to the TV sound only from the AQUOS TV speaker system. 2 Select the programme to record. Press a/b to select "By AQUOS SP", and then press ;. Refer to the operation manual of the recorder for details. Sound mode change You can manually change the AQUOS AUDIO speaker system's sound mode. Top menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. 1 Press a/b to select "Top menu/title list", and then press ;. The linked recorder now powers on and the TV automatically selects the appropriate external input source. The title list data from the connected AQUOS BD player/ AQUOS recorder displays. 1 2 Press a/b to select "Sound mode change". The sound mode changes every time you press ;. Refer to the operation manual of the AQUOS AUDIO speaker system for details. Model select If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. 2 3 Press @ to hide the menu screen to operate a/b/c/d buttons. Select the title with a/b/c/d, and then press PLAY I. Press a/b to select "Model select", and then press ;. The HDMI device changes every time you press ;. Basic adjustment Picture settings Go to "Menu" > "Setup" > "Picture". Menu CH list :Enter :Back Setup You can also select "AV mode" by pressing #. The item marked with * is available only when selecting "HDMI 1", "HDMI 2", "HDMI 3", "HDMI 4" or "EXT 3" from the "INPUT" menu. The minimum setting cannot be set to a bigger number than the maximum setting. The maximum and minimum settings cannot be set to the same number. Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Basic adjustment Audio settings Go to "Menu" > "Setup" > "Audio". Menu CH list :Enter :Back Audio Bass enhancer This function allows you to enjoy bass-enhanced sound. Setup Audio Clear voice Audio STANDARD Auto volume Treble Bass Balance L30 This function emphasises speech against background noise for greater clarity. [Off] Setting audio input Option Audio select R30 Audio Auto volume Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. This function reduces this problem by equalizing levels. Item High Middle Low Off Slightly reduces the volume gaps among different sound sources. Strongly reduces the volume gaps among different sound sources. When using the EXT 3 terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input. Go to "Menu" > "Setup" > "Option" > "Terminal setting" > "PC input" > "Audio select". When selecting "HDMI 2" from the "INPUT" menu Item HDMI (Digital) When connecting devices (including a PC) with HDMI cable to the HDMI 2 terminal. When connecting devices (including a PC) with DVI/HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO (R/L) jack. HDMI+Analog NOTE Audio You must set this to "HDMI+Analog" when connecting devices (including a PC) with an HDMI-certified cable to the HDMI 2 terminal. If "HDMI (Digital)" is set, there will be no sound output. Audio adjustment You can adjust the sound quality to your preference with the following settings. Selectable items Treble Bass Balance c (Cursor) For weaker treble For weaker bass Decrease audio from the right speaker d (Cursor) For stronger treble For stronger bass Decrease audio from the left speaker When selecting "EXT 3" from the "INPUT" menu Item Video When connecting devices with AV cable to the EXT 3 terminal, display images without audio. When connecting a PC to the EXT 3 terminal, and inputting analogue audio signals from the AUDIO (R/L) jack. Video+audio NOTE Audio You must also set "COMPONENT" from the "Input select" menu when selecting "EXT 3" from the "INPUT" menu (Pages 15 and 40). Surround This function allows you to enjoy realistic live sound. Basic adjustment Power save settings Go to "Menu" > "Setup" > "ECO". Menu CH list :Enter :Back E "Energy save" status icons Icon Description "Energy save" is set to "Standard". "Energy save" is set to "Advanced". Setup ECO ECO picture control Energy save No signal off No operation off When "Energy save" is set to "Standard" or "Advanced", "Energy save" status icons appear in the "Picture" menu and channel information windows. ECO [On] No signal off When set to "Enable", the TV will automatically enter standby mode if there is no signal input for 15 minutes. [Off] [Disable] [Disable] NOTE Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals. ECO ECO picture control This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged. ECO No operation off The TV will automatically enter standby mode if no operations are performed in three hours if "Enable" is selected. NOTE This function does not work when "AV mode" is set to "DYNAMIC (Fixed)" or "AUTO". This function does not work when "Energy save" is set to "Standard" or "Advanced". NOTE Five minutes before the TV enters standby mode, the remaining time displays every minute. ECO ECO Energy save This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table. Item Standard Advanced Off Reduces the backlight brightness. Reduces the backlight brightness more than "Standard". [. . . ] Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: e 5 C to e 35 C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems. Appendix Specifications Item LCD COLOUR TV (40 o/81. 28 cm), LC-40LE820E, LC40LE810E Advanced Super View & BLACK TFT LCD (40 o/81. 28 cm) 1, 920 x 1, 080 x 4 pixels PAL/SECAM/NTSC 3. 58/NTSC 4. 43/PAL 60 Analogue Digital Receiving channel TV-tuning system STEREO/BILINGUAL Audio amplifier Speaker Terminals Antenna RS-232C EXT 1 EXT 2 EXT 3 HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB ETHERNET (10/100) HDMI 2/EXT 3 AUDIO (L/R) DIGITAL AUDIO OUTPUT C. (Common Interface) OUTPUT/Headphones OSD language VHF/UHF CATV CCIR (B/G, I, D/K, L/L') DVB-T (2K/8K OFDM), DVB-C IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch, I21_I69 ch, IR A_IR J ch Hyper-band, S1_S41 ch Auto Preset 999 ch (non-Nordic [DTV]), Auto Preset 9999 ch (Nordic [DTV]), Auto Preset 99 ch (ATV), Auto Label, Auto Sort NICAM/A2 10 W x 2/15 W x 1 (234 mm x 22 mm) x 2/ 110 mm UHF/VHF 75 q Din type (analogue & digital) D-Sub 9 pin male connector SCART (AV input, Y/C input, RGB input, TV output) RCA pin (AV input/AUDIO L/R) 15 pin mini D-sub HDMI (ARC) HDMI HDMI HDMI USB Home network connector (only the 820 model series) 3. 5 mm jack*1 Optical S/PDIF digital audio output EN50221, R206001, CI Plus specification RCA pin (AUDIO R/L)/ 3. 5 mm jack (audio output) Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian AC 220_240 V, 50 Hz 820 models 810 models 820 models 810 models Operating temperature I LCD COLOUR TV (46 o/116. 84 cm), LC-46LE820E, LC46LE810E Advanced Super View & BLACK TFT LCD (46 o/116. 84 cm) LCD COLOUR TV (52 o/132. 08 cm), LC52LE820E Advanced Super View & BLACK TFT LCD (52 o/132. 08 cm) LCD panel Resolution Video colour system TV function TV-standard Power requirement Power consumption (method IEC62087) Weight 127 W (0. 2 W standby*2) 127 W (0. 2 W standby*2) 19. 5 kg (without stand), 23. 5 kg (with stand) 16. 0 kg (without stand), 19. 5 kg (with stand) 0 C to e 40 C 147 W (0. 2 W standby*2) 147 W (0. 2 W standby*2) 24. 5 kg (without stand), 30. 0 kg (with stand) 20. 5 kg (without stand), 26. 0 kg (with stand) 159 W (0. 2 W standby*2) 30. 0 kg (without stand), 35. 0 kg (with stand) The HDMI 2 and EXT 3 terminals can both use the same audio input terminal. [. . . ]